Hi, On 16 November 2016 at 06:43, Fabian Vogt <fv...@suse.com> wrote: > Hi, > > any news on this? As far as I can tell nothing happened after my last > reply to this thread, so: Ping!
Adding Tom - the patches are assigned to him in Patchwork. - Simon > > Thanks, > Fabian > > Am Montag, 26. September 2016, 14:26:42 CET schrieben Sie: >> This patch series modifies the used drivers to work with OF_CONTROL >> and switches the board code and configs to use it. >> The added device trees are directly from the linux kernel tree >> and can thus be used for booting the (upstream) kernel. >> >> Fabian Vogt (9): >> gpio: bcm2835: add device tree support >> serial: bcm283x_mu: add device tree support >> serial: pl01x: expose skip_init platdata option in DT >> fdt: add dt-bindings for bcm2835 >> fdt: import bcm283x device tree sources from the linux kernel tree >> fdt: adjust bcm283x device tree for u-boot >> serial: bcm283x_mu: support disabling after initialization >> board: rpi: move uart deactivation to board_init >> ARM: bcm283x: use OF_CONTROL for bcm283x >> >> arch/arm/Kconfig | 1 + >> arch/arm/dts/Makefile | 9 + >> arch/arm/dts/bcm2835-rpi-a-plus.dts | 35 +++ >> arch/arm/dts/bcm2835-rpi-a.dts | 28 ++ >> arch/arm/dts/bcm2835-rpi-b-plus.dts | 36 +++ >> arch/arm/dts/bcm2835-rpi-b-rev2.dts | 29 ++ >> arch/arm/dts/bcm2835-rpi-b.dts | 23 ++ >> arch/arm/dts/bcm2835-rpi.dtsi | 86 ++++++ >> arch/arm/dts/bcm2835.dtsi | 25 ++ >> arch/arm/dts/bcm2836-rpi-2-b.dts | 40 +++ >> arch/arm/dts/bcm2836.dtsi | 78 +++++ >> arch/arm/dts/bcm2837-rpi-3-b.dts | 30 ++ >> arch/arm/dts/bcm2837.dtsi | 76 +++++ >> arch/arm/dts/bcm283x-rpi-smsc9512.dtsi | 19 ++ >> arch/arm/dts/bcm283x-rpi-smsc9514.dtsi | 19 ++ >> arch/arm/dts/bcm283x-uboot.dtsi | 22 ++ >> arch/arm/dts/bcm283x.dtsi | 323 >> +++++++++++++++++++++ >> board/raspberrypi/rpi/rpi.c | 77 ++--- >> configs/rpi_2_defconfig | 2 + >> configs/rpi_3_32b_defconfig | 2 + >> configs/rpi_3_defconfig | 2 + >> configs/rpi_defconfig | 2 + >> doc/device-tree-bindings/gpio/bcm2835-gpio.txt | 5 + >> .../serial/bcm2835-aux-uart.txt | 10 + >> doc/device-tree-bindings/serial/pl01x.txt | 3 + >> drivers/gpio/bcm2835_gpio.c | 24 ++ >> drivers/serial/serial_bcm283x_mu.c | 46 ++- >> drivers/serial/serial_pl01x.c | 2 + >> include/configs/rpi.h | 1 - >> include/dt-bindings/clock/bcm2835-aux.h | 17 ++ >> include/dt-bindings/clock/bcm2835.h | 66 +++++ >> include/dt-bindings/pinctrl/bcm2835.h | 27 ++ >> include/dt-bindings/power/raspberrypi-power.h | 41 +++ >> 33 files changed, 1152 insertions(+), 54 deletions(-) >> create mode 100644 arch/arm/dts/bcm2835-rpi-a-plus.dts >> create mode 100644 arch/arm/dts/bcm2835-rpi-a.dts >> create mode 100644 arch/arm/dts/bcm2835-rpi-b-plus.dts >> create mode 100644 arch/arm/dts/bcm2835-rpi-b-rev2.dts >> create mode 100644 arch/arm/dts/bcm2835-rpi-b.dts >> create mode 100644 arch/arm/dts/bcm2835-rpi.dtsi >> create mode 100644 arch/arm/dts/bcm2835.dtsi >> create mode 100644 arch/arm/dts/bcm2836-rpi-2-b.dts >> create mode 100644 arch/arm/dts/bcm2836.dtsi >> create mode 100644 arch/arm/dts/bcm2837-rpi-3-b.dts >> create mode 100644 arch/arm/dts/bcm2837.dtsi >> create mode 100644 arch/arm/dts/bcm283x-rpi-smsc9512.dtsi >> create mode 100644 arch/arm/dts/bcm283x-rpi-smsc9514.dtsi >> create mode 100644 arch/arm/dts/bcm283x-uboot.dtsi >> create mode 100644 arch/arm/dts/bcm283x.dtsi >> create mode 100644 doc/device-tree-bindings/gpio/bcm2835-gpio.txt >> create mode 100644 doc/device-tree-bindings/serial/bcm2835-aux-uart.txt >> create mode 100644 include/dt-bindings/clock/bcm2835-aux.h >> create mode 100644 include/dt-bindings/clock/bcm2835.h >> create mode 100644 include/dt-bindings/pinctrl/bcm2835.h >> create mode 100644 include/dt-bindings/power/raspberrypi-power.h >> >> > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
