USB1 is not used on AM57xx GP EVM in device mode.
Enabling DWC3 USB support for AM57xx EVM gives
the following warnings:
CC board/ti/am57xx/board.o
../board/ti/am57xx/board.c:448:27: warning: 'usb_otg_ss1' defined but not used
[-Wunused-variable]
static struct dwc3_device usb_otg_ss1 = {
^
../board/ti/am57xx/board.c:455:32: warning: 'usb_otg_ss1_glue' defined but not
used [-Wunused-variable]
static struct dwc3_omap_device usb_otg_ss1_glue = {
^
../board/ti/am57xx/board.c:461:33: warning: 'usb_phy1_device' defined but not
used [-Wunused-variable]
static struct ti_usb_phy_device usb_phy1_device = {
Fix it by getting rid of USB1 related structures from
board.c. They can be added back if there is a need for
them.
Signed-off-by: Sekhar Nori <nsek...@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvu...@ti.com>
---
board/ti/am57xx/board.c | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 64de60254136..f3e3f0bd3d60 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -447,26 +447,6 @@ int spl_start_uboot(void)
#endif
#ifdef CONFIG_USB_DWC3
-static struct dwc3_device usb_otg_ss1 = {
- .maximum_speed = USB_SPEED_SUPER,
- .base = DRA7_USB_OTG_SS1_BASE,
- .tx_fifo_resize = false,
- .index = 0,
-};
-
-static struct dwc3_omap_device usb_otg_ss1_glue = {
- .base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
- .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
- .index = 0,
-};
-
-static struct ti_usb_phy_device usb_phy1_device = {
- .pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
- .usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
- .usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
- .index = 0,
-};
-
static struct dwc3_device usb_otg_ss2 = {
.maximum_speed = USB_SPEED_HIGH,
.base = DRA7_USB_OTG_SS2_BASE,
--
2.9.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
