Hi Stefano,

On Sun, Nov 6, 2016 at 9:28 PM, Jagan Teki <ja...@openedev.com> wrote:
> Hi Stefano,
>
> On Fri, Oct 28, 2016 at 7:27 PM, Jagan Teki <ja...@openedev.com> wrote:
>> From: Jagan Teki <ja...@amarulasolutions.com>
>>
>> This series support framebuffer and I2C on top of u-boot-imx.git with
>> latest u-boot.git merge.
>>
>> Changes for v2:
>> - Rebase on u-boot-imx.git and u-boot.git
>>
>> Jagan Teki (7):
>>   video: Kconfig: Add VIDEO_IPV3 entry
>>   imx6: icorem6: Add framebuffer support
>>   imx6: icorem6: Add custom splashscreen support
>>   i2c: Kconfig: Add SYS_I2C_MXC entry
>>   i2c: mxc: Print hex instead of decimal for bus address
>>   i2c: mxc: Make 'no gpio pinctrl state' print as debug
>>   imx6: icorem6: Add I2C support
>>
>>  arch/arm/cpu/armv7/mx6/Kconfig       |   1 +
>>  board/engicam/icorem6/icorem6.c      | 113 
>> +++++++++++++++++++++++++++++++++++
>>  configs/imx6qdl_icore_mmc_defconfig  |   5 +-
>>  configs/imx6qdl_icore_nand_defconfig |   5 +-
>>  drivers/i2c/Kconfig                  |   8 +++
>>  drivers/i2c/mxc_i2c.c                |   2 +-
>>  drivers/video/Kconfig                |   8 +++
>>  include/configs/imx6qdl_icore.h      |  14 +++++
>>  tools/logos/engicam.bmp              | Bin 0 -> 60214 bytes
>>  9 files changed, 153 insertions(+), 3 deletions(-)
>>  create mode 100755 tools/logos/engicam.bmp
>
> Any comments?

Please apply if you it's OK?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to