Replace CONFIG_P1021 with ARCH_P1021 in Kconfig and clean up
existing macros.
Signed-off-by: York Sun <york....@nxp.com>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 ++++
arch/powerpc/cpu/mpc85xx/Makefile | 2 +-
arch/powerpc/cpu/mpc85xx/speed.c | 2 +-
arch/powerpc/include/asm/config_mpc85xx.h | 2 +-
arch/powerpc/include/asm/immap_85xx.h | 2 +-
drivers/qe/uec.c | 10 +++++-----
include/configs/p1_p2_rdb_pc.h | 1 -
scripts/config_whitelist.txt | 1 -
8 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 9142b33..5550687 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -144,6 +144,7 @@ config TARGET_P1021RDB
bool "Support P1021RDB"
select SUPPORT_SPL
select SUPPORT_TPL
+ select ARCH_P1021
config TARGET_P1024RDB
bool "Support P1024RDB"
@@ -287,6 +288,9 @@ config ARCH_P1011
config ARCH_P1020
bool
+config ARCH_P1021
+ bool
+
config ARCH_P1022
bool
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile
b/arch/powerpc/cpu/mpc85xx/Makefile
index 26a6786..515647d 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -75,7 +75,7 @@ obj-$(CONFIG_ARCH_MPC8572) += mpc8572_serdes.o
obj-$(CONFIG_ARCH_P1010) += p1010_serdes.o
obj-$(CONFIG_ARCH_P1011) += p1021_serdes.o
obj-$(CONFIG_ARCH_P1020) += p1021_serdes.o
-obj-$(CONFIG_P1021) += p1021_serdes.o
+obj-$(CONFIG_ARCH_P1021) += p1021_serdes.o
obj-$(CONFIG_ARCH_P1022) += p1022_serdes.o
obj-$(CONFIG_ARCH_P1023) += p1023_serdes.o
obj-$(CONFIG_P1024) += p1021_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 4e63859..8155620 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -596,7 +596,7 @@ void get_sys_info(sys_info_t *sys_info)
#endif
#ifdef CONFIG_QE
-#if defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
sys_info->freq_qe = sys_info->freq_systembus;
#else
qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h
b/arch/powerpc/include/asm/config_mpc85xx.h
index 4947e18..bcd7550 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -199,7 +199,7 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
-#elif defined(CONFIG_P1021)
+#elif defined(CONFIG_ARCH_P1021)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
diff --git a/arch/powerpc/include/asm/immap_85xx.h
b/arch/powerpc/include/asm/immap_85xx.h
index c82c709..b0f81ec 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2488,7 +2488,7 @@ typedef struct ccsr_gur {
u8 res11a[76];
par_io_t qe_par_io[7];
u8 res11b[1600];
-#elif defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#elif defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
u8 res11a[12];
u32 iovselsr;
u8 res11b[60];
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index d0398d2..2bb630d 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -567,7 +567,7 @@ static void phy_change(struct eth_device *dev)
{
uec_private_t *uec = (uec_private_t *)dev->priv;
-#if defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* QE9 and QE12 need to be set for enabling QE MII managment signals */
@@ -578,7 +578,7 @@ static void phy_change(struct eth_device *dev)
/* Update the link, speed, duplex */
uec->mii_info->phyinfo->read_status(uec->mii_info);
-#if defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
/*
* QE12 is muxed with LBCTL, it needs to be released for enabling
* LBCTL signal for LBC usage.
@@ -1193,14 +1193,14 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
uec_private_t *uec;
int err, i;
struct phy_info *curphy;
-#if defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
uec = (uec_private_t *)dev->priv;
if (uec->the_first_run == 0) {
-#if defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
/* QE9 and QE12 need to be set for enabling QE MII managment signals */
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
@@ -1232,7 +1232,7 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
udelay(100000);
} while (1);
-#if defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_P1025)
/* QE12 needs to be released for enabling LBCTL signal*/
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
#endif
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index c9191fa..5689113 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -82,7 +82,6 @@
#if defined(CONFIG_TARGET_P1021RDB)
#define CONFIG_BOARDNAME "P1021RDB-PC"
#define CONFIG_NAND_FSL_ELBC
-#define CONFIG_P1021
#define CONFIG_QE
#define CONFIG_VSC7385_ENET
#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 858c2d0..9bee3fe 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3383,7 +3383,6 @@ CONFIG_OS2_ENV_ADDR
CONFIG_OS_ENV_ADDR
CONFIG_OTHBOOTARGS
CONFIG_OVERWRITE_ETHADDR_ONCE
-CONFIG_P1021
CONFIG_P1024
CONFIG_P1025
CONFIG_P2020
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
