Hello, I'm trying to get u-boot working on QEMU so I understand how it works before moving to an embedded system.
After following the instructions here: https://lists.nongnu.org/archive/html/qemu-devel/2015-05/msg04835.html U-Boot is always crashing, even when omitting the network stuff. Below is how I'm currently trying to boot: qemu-system-i386 -nographic -bios u-boot.rom And here is the ending result: U-Boot 2016.11 (Nov 21 2016 - 14:03:23 -0600) CPU: x86, vendor Intel, device 663h DRAM: 128 MiB Using default environment Video: General Protection EIP: 0010:[<07f685e4>] EFLAGS: 00000046 Original EIP :[<fff005e4>] EAX: 00000012 EBX: 00000010 ECX: 00000000 EDX: 07d643cf ESI: 07fad1dc EDI: 07d643e0 EBP: 07fcf564 ESP: 07d64384 DS: 0018 ES: 0018 FS: 0020 GS: 0018 SS: 0018 CR0: 00000033 CR2: 00000000 CR3: 00000000 CR4: 00000000 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Stack: 0x07d643c4 : 0x0000001c 0x07d643c0 : 0x7acd6388 0x07d643bc : 0x00000111 0x07d643b8 : 0x000c0000 0x07d643b4 : 0x00000000 0x07d643b0 : 0x074a7205 0x07d643ac : 0x07f87d87 0x07d643a8 : 0x7acd6388 0x07d643a4 : 0x3b9aca00 0x07d643a0 : 0x00000000 0x07d6439c : 0x07f8dbe9 0x07d64398 : 0x07d67720 0x07d64394 : 0x00000002 0x07d64390 : 0xc0010001 0x07d6438c : 0x00000246 0x07d64388 : 0x00000010 --->0x07d64384 : 0x07f6a997 0x07d64380 : 0x00000046 0x07d6437c : 0x00000010 0x07d64378 : 0x07f685e4 ### ERROR ### Please RESET the board ### I think I'm on the bleeding edge branch, but even then when reverting to the v2016.09.01 tag, I still crash. If there is any additional information that I can provide please let me know. Regards, Eric Neblock _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
