From: Stefan Agner <stefan.ag...@toradex.com>
Some devices (e.g. dra7xx) support loading to RAM using DFU without
having direct boot from RAM support. Make sure the linker list
does not contain BOOT_DEVICE_RAM if CONFIG_SPL_RAM_DEVICE is not
enabled.
Fixes: 98136b2f26fa ("spl: Convert spl_ram_load_image() to use linker list")
Signed-off-by: Stefan Agner <stefan.ag...@toradex.com>
Acked-by: Lukasz Majewski <l.majew...@samsung.com>
---
Changes in v4:
- Use correct config CONFIG_SPL_RAM_DEVICE to descide whether to add
BOOT_DEVICE_RAM to linker list.
Changes in v3: None
Changes in v2:
- Use CONFIG_SPL_RAM_SUPPORT to descide whether to compile the
function in first place.
common/spl/spl.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/common/spl/spl.c b/common/spl/spl.c
index bdb165a..32b9f1e 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -220,7 +220,9 @@ static int spl_ram_load_image(struct spl_image_info
*spl_image,
return 0;
}
+#if defined(CONFIG_SPL_RAM_DEVICE)
SPL_LOAD_IMAGE_METHOD(0, BOOT_DEVICE_RAM, spl_ram_load_image);
+#endif
#if defined(CONFIG_SPL_DFU_SUPPORT)
SPL_LOAD_IMAGE_METHOD(0, BOOT_DEVICE_DFU, spl_ram_load_image);
#endif
--
2.10.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
