Hi Konrad, are you using the AT91SAM9G20-EK?
In that case the difference between us is that I'm working on a different board which is using the slotb MCI while the AT91SAM9G20-EK uses slota. In case of slota it just worked because MCI_SDCR is 0 on reset but for slotb the SDCSEL field must be set to 1. Regards Sebastian Heutling On 10/01/2009 09:59 AM, Konrad Mattheis wrote: > Hi, > > for me this is working: > > Downloaded u-boot 2009.08 > > file cpu/arm926ejs/at91/at91sam9260_devices.c >> >> changed: >>> #if defined(CONFIG_HAS_DATAFLASH) >> to: >>> #if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) > > patches: > > SOC headers: > http://lists.denx.de/pipermail/u-boot/2009-September/060053.html > > SD Patch V3 > http://lists.denx.de/pipermail/u-boot/2009-September/060243.html > > MCI support > http://lists.denx.de/pipermail/u-boot/2009-August/059595.html > > add to board init code: > > at91_mciX_hw_init (X for mci unit 0 / 1) for parameters have a look at > cpu/arm926ejs/at91/at91sam9260_devices.c > > bye > Konrad Mattheis > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
