Move CONFIG_SYS_NO_FLASH symbol to the default config files, such as, configs/sama5d2_xplained_*_defconfig.
Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com> --- configs/sama5d2_xplained_mmc_defconfig | 9 ++++----- configs/sama5d2_xplained_spiflash_defconfig | 7 +++---- include/configs/sama5d2_xplained.h | 3 --- 3 files changed, 7 insertions(+), 12 deletions(-) diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index 8a786f1..b63787a 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -8,12 +8,11 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_DM_GPIO=y -CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y @@ -34,24 +33,24 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DM=y CONFIG_SPL_DM=y -CONFIG_BLK=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_UTMI=y CONFIG_AT91_H32MX=y CONFIG_AT91_GENERIC_CLK=y +CONFIG_DM_GPIO=y CONFIG_ATMEL_PIO4=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y CONFIG_DM_MMC=y -CONFIG_DM_MMC_OPS=y CONFIG_ATMEL_SDHCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91PIO4=y +CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_ATMEL=y CONFIG_DEBUG_UART_BASE=0xf8020000 @@ -62,8 +61,8 @@ CONFIG_ATMEL_USART=y CONFIG_DM_SPI=y CONFIG_ATMEL_SPI=y CONFIG_USB=y -CONFIG_USB_STORAGE=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index 51594e7..74e661d 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -7,12 +7,11 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y -CONFIG_DM_GPIO=y -CONFIG_DM_SERIAL=y CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 +CONFIG_SYS_NO_FLASH=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL=y CONFIG_HUSH_PARSER=y @@ -33,24 +32,24 @@ CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_DM=y CONFIG_SPL_DM=y -CONFIG_BLK=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_UTMI=y CONFIG_AT91_H32MX=y CONFIG_AT91_GENERIC_CLK=y +CONFIG_DM_GPIO=y CONFIG_ATMEL_PIO4=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y CONFIG_DM_MMC=y -CONFIG_DM_MMC_OPS=y CONFIG_ATMEL_SDHCI=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91PIO4=y +CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_ATMEL=y CONFIG_DEBUG_UART_BASE=0xf8020000 diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index f694645..ce530ea 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -10,9 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* No NOR flash, this definition should put before common header */ -#define CONFIG_SYS_NO_FLASH - #include "at91-sama5_common.h" #define CONFIG_BOARD_EARLY_INIT_F -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
