The ARMv8 capable Allwinner A64 SoC comes out of reset in AArch32 mode.
To run AArch64 code, we have to trigger a warm reset via the RMR register,
which proceeds with code execution at the address stored in the RVBAR
register.
If the bootable payload in the FIT image is using a different
architecture than the SPL has been compiled for, enter it via this said
RMR switch mechanism, by writing the entry point address into the MMIO
mapped, writable version of the RVBAR register.
Then the warm reset is triggered via a system register write.
If the payload architecture is the same as the SPL, we use the normal
branch as usual.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
arch/arm/lib/spl.c | 14 ++++++++++
arch/arm/mach-sunxi/Makefile | 1 +
arch/arm/mach-sunxi/spl_switch.c | 60 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 75 insertions(+)
create mode 100644 arch/arm/mach-sunxi/spl_switch.c
diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c
index e606d47..ae3d81c 100644
--- a/arch/arm/lib/spl.c
+++ b/arch/arm/lib/spl.c
@@ -63,3 +63,17 @@ void __noreturn jump_to_image_linux(struct spl_image_info
*spl_image, void *arg)
image_entry(0, machid, arg);
}
#endif
+
+u8 spl_genimg_get_arch_id(const char *arch_str)
+{
+ if (!arch_str)
+ return IH_ARCH_DEFAULT;
+
+ if (!strcmp(arch_str, "arm"))
+ return IH_ARCH_ARM;
+
+ if (!strcmp(arch_str, "arm64"))
+ return IH_ARCH_ARM64;
+
+ return IH_ARCH_DEFAULT;
+}
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 7daba11..128091e 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -51,4 +51,5 @@ obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o
obj-$(CONFIG_MACH_SUN50I) += dram_sun8i_h3.o
+obj-$(CONFIG_MACH_SUN50I) += spl_switch.o
endif
diff --git a/arch/arm/mach-sunxi/spl_switch.c b/arch/arm/mach-sunxi/spl_switch.c
new file mode 100644
index 0000000..20f21b1
--- /dev/null
+++ b/arch/arm/mach-sunxi/spl_switch.c
@@ -0,0 +1,60 @@
+/*
+ * (C) Copyright 2016 ARM Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/barriers.h>
+
+static void __noreturn jump_to_image_native(struct spl_image_info *spl_image)
+{
+ typedef void __noreturn (*image_entry_noargs_t)(void);
+
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t)spl_image->entry_point;
+
+ image_entry();
+}
+
+static void __noreturn reset_rmr_switch(void)
+{
+#ifdef CONFIG_ARM64
+ __asm__ volatile ( "mrs x0, RMR_EL3\n\t"
+ "bic x0, x0, #1\n\t" /* Clear enter-in-64 bit */
+ "orr x0, x0, #2\n\t" /* set reset request bit */
+ "msr RMR_EL3, x0\n\t"
+ "isb sy\n\t"
+ "nop\n\t"
+ "wfi\n\t"
+ "b .\n"
+ ::: "x0");
+#else
+ __asm__ volatile ( "mrc 15, 0, r0, cr12, cr0, 2\n\t"
+ "orr r0, r0, #3\n\t" /* request reset in 64 bit */
+ "mcr 15, 0, r0, cr12, cr0, 2\n\t"
+ "isb\n\t"
+ "nop\n\t"
+ "wfi\n\t"
+ "b .\n"
+ ::: "r0");
+#endif
+ while (1); /* to avoid a compiler warning about __noreturn */
+}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+ if (spl_image->arch == IH_ARCH_DEFAULT) {
+ debug("entering by branch\n");
+ jump_to_image_native(spl_image);
+ } else {
+ debug("entering by RMR switch\n");
+ writel(spl_image->entry_point, 0x17000a0);
+ DSB;
+ ISB;
+ reset_rmr_switch();
+ }
+}
--
2.8.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
