Due to introducing the at91 clock driver, add the clock support.

Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
---

Changes in v2:
 - Use positive logic, #ifdef...#else...#endif.
 - Remove unnecessary splitting the signature of macb_mdc_clk_div()
   and others.

 drivers/net/macb.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 01527f7..f97b82a 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -4,6 +4,7 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 
 /*
@@ -112,6 +113,7 @@ struct macb_device {
        struct mii_dev          *bus;
 
 #ifdef CONFIG_DM_ETH
+       unsigned long           pclk_rate;
        phy_interface_t         phy_interface;
 #endif
 };
@@ -754,7 +756,11 @@ static int _macb_write_hwaddr(struct macb_device *macb, 
unsigned char *enetaddr)
 static u32 macb_mdc_clk_div(int id, struct macb_device *macb)
 {
        u32 config;
+#ifdef CONFIG_DM_ETH
+       unsigned long macb_hz = macb->pclk_rate;
+#else
        unsigned long macb_hz = get_macb_pclk_rate(id);
+#endif
 
        if (macb_hz < 20000000)
                config = MACB_BF(CLK, MACB_CLK_DIV8);
@@ -771,7 +777,12 @@ static u32 macb_mdc_clk_div(int id, struct macb_device 
*macb)
 static u32 gem_mdc_clk_div(int id, struct macb_device *macb)
 {
        u32 config;
+
+#ifdef CONFIG_DM_ETH
+       unsigned long macb_hz = macb->pclk_rate;
+#else
        unsigned long macb_hz = get_macb_pclk_rate(id);
+#endif
 
        if (macb_hz < 20000000)
                config = GEM_BF(CLK, GEM_CLK_DIV8);
@@ -991,6 +1002,30 @@ static const struct eth_ops macb_eth_ops = {
        .write_hwaddr   = macb_write_hwaddr,
 };
 
+static int macb_enable_clk(struct udevice *dev)
+{
+       struct macb_device *macb = dev_get_priv(dev);
+       struct clk clk;
+       ulong clk_rate;
+       int ret;
+
+       ret = clk_get_by_index(dev, 0, &clk);
+       if (ret)
+               return -EINVAL;
+
+       ret = clk_enable(&clk);
+       if (ret)
+               return ret;
+
+       clk_rate = clk_get_rate(&clk);
+       if (!clk_rate)
+               return -EINVAL;
+
+       macb->pclk_rate = clk_rate;
+
+       return 0;
+}
+
 static int macb_eth_probe(struct udevice *dev)
 {
        struct eth_pdata *pdata = dev_get_platdata(dev);
@@ -998,6 +1033,7 @@ static int macb_eth_probe(struct udevice *dev)
 
 #ifdef CONFIG_DM_ETH
        const char *phy_mode;
+       int ret;
 
        phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
        if (phy_mode)
@@ -1010,7 +1046,12 @@ static int macb_eth_probe(struct udevice *dev)
 
        macb->regs = (void *)pdata->iobase;
 
+       ret = macb_enable_clk(dev);
+       if (ret)
+               return ret;
+
        _macb_eth_initialize(macb);
+
 #if defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB)
        int retval;
        struct mii_dev *mdiodev = mdio_alloc();
-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to