The purpose of patch set is to convert the board to support Device
Tree and Driver Model.
They are based on the following patches:
1./ [PATCH v3 0/2] pinctrl: at91: Add pinctrl driver
http://lists.denx.de/pipermail/u-boot/2016-October/270991.html
2./ [PATCH v1 0/2] ARM: dts: at91: add dts files for the boards of
SAMA5D3
http://lists.denx.de/pipermail/u-boot/2016-October/271241.html
3./ [PATCH v3 0/2] serial: atmel_usart: Support to enable an early
debug UART
http://lists.denx.de/pipermail/u-boot/2016-October/270250.html
4./ [PATCH v2 0/3] gpio: at91_gpio: Add option and clock support
http://lists.denx.de/pipermail/u-boot/2016-October/271231.html
5./ [PATCH v11] dm: at91: Add driver model support for the spi driver
http://lists.denx.de/pipermail/u-boot/2016-October/271235.html
6./ [PATCH v2 0/8] board: sama5d4: convert boards to support DM/DT
http://lists.denx.de/pipermail/u-boot/2016-October/271244.html
Wenyou Yang (7):
board: sama5d3xek: move config options to defconfig
board: sama5d3xek: clean up code
board: sama5d3xek: enable early debug UART
board: sama5d3_xplained: move config options to defconfig
board: sama5d3_xplained: clean up code
board: sama5d3_xplained: enable early debug UART
configs: sama5d3_xplained: move CONFIG_SYS_NO_FLASH to defconfig
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 35 +++++-----
board/atmel/sama5d3xek/sama5d3xek.c | 86 +++++--------------------
configs/sama5d3_xplained_mmc_defconfig | 28 +++++++-
configs/sama5d3_xplained_nandflash_defconfig | 28 +++++++-
configs/sama5d3xek_mmc_defconfig | 30 ++++++++-
configs/sama5d3xek_nandflash_defconfig | 31 ++++++++-
configs/sama5d3xek_spiflash_defconfig | 30 ++++++++-
include/configs/sama5d3_xplained.h | 10 +--
include/configs/sama5d3xek.h | 17 +----
9 files changed, 174 insertions(+), 121 deletions(-)
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
