On Wed, Oct 26, 2016 at 8:38 PM, Stefano Babic <sba...@denx.de> wrote: > Hi Jagan, > > > On 25/10/2016 08:23, Jagan Teki wrote: >> From: Jagan Teki <ja...@amarulasolutions.com> >> >> Add NAND support for Engicam i.CoreM6 qdl board. >> >> Boot Log: >> -------- >> >> U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43) >> Trying to boot from NAND >> NAND : 512 MiB >> >> U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530) >> >> CPU: Freescale i.MX6SOLO rev1.3 at 792MHz >> CPU: Industrial temperature grade (-40C to 105C) at 55C >> Reset cause: WDOG >> Model: Engicam i.CoreM6 DualLite/Solo Starter Kit >> DRAM: 256 MiB >> NAND: 512 MiB >> MMC: FSL_SDHC: 0 >> In: serial >> Out: serial >> Err: serial >> Net: FEC [PRIME] >> Hit any key to stop autoboot: 0 >> icorem6qdl> >> >> Cc: Scott Wood <o...@buserror.net> >> Cc: Stefano Babic <sba...@denx.de> >> Cc: Peng Fan <peng....@nxp.com> >> Cc: Matteo Lisi <matteo.l...@engicam.com> >> Cc: Michael Trimarchi <mich...@amarulasolutions.com> >> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> >> --- >> Changes for v9: >> - Add below configs on defconfig >> # CONFIG_BLK is not set >> # CONFIG_DM_MMC_OPS is not set > > It was nice if it was set. But if you simply grep in this poathc, they > are not. Just changelog was touched. > > But let's see what we can do to improve. I have merged patches up to 14 > (without NAND support). I will push them to the server and they are part > of my next PR. > > As I propose, I could fix this myself in this patch if you agree - or > then please post the rest of patches, but after checking the board can > be built.
I am OK, please fix from you side and also please apply this [1] series as well, all Acked-by Jeo [1] [PATCH v7 0/5] net: fec_mxc: Convert to DM thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
