On Wed, Sep 28, 2016 at 4:39 PM, Yuan Yao <yao.y...@freescale.com> wrote:
> From: Yuan Yao <yao.y...@nxp.com>
>
> The QSPI support the direct 4bytes address command for flash
> read/write/erase.
> And the address can cover the whole QSPI memory space.
>
> Signed-off-by: Yuan Yao <yao.y...@nxp.com>
> ---
> drivers/spi/fsl_qspi.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
> index 2144fca..119b782 100644
> --- a/drivers/spi/fsl_qspi.c
> +++ b/drivers/spi/fsl_qspi.c
> @@ -25,7 +25,8 @@ DECLARE_GLOBAL_DATA_PTR;
> #define TX_BUFFER_SIZE 0x40
> #endif
>
> -#define OFFSET_BITS_MASK GENMASK(23, 0)
> +#define OFFSET_BITS_MASK ((FSL_QSPI_FLASH_SIZE > SZ_16M) ? \
> + GENMASK(27, 0) : GENMASK(23, 0))
>
> #define FLASH_STATUS_WEL 0x02
>
> @@ -760,7 +761,10 @@ int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int
> bitlen,
> if (dout) {
> if (flags & SPI_XFER_BEGIN) {
> priv->cur_seqid = *(u8 *)dout;
> - memcpy(&txbuf, dout, 4);
> + if (FSL_QSPI_FLASH_SIZE > SZ_16M)
> + memcpy(&txbuf, dout + 1, 4);
> + else
> + memcpy(&txbuf, dout, 4);
This driver has lot of flash hacks, and I am completely unhappy about
this please try to write new driver on flash side (mtd/spi).
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
