I accidentally left v2 of "NAND: DaVinci:Adding 4 BIT ECC support"
applied when I pushed the tree last merge window, and missed these fixes
which were in v3 of that patch.
Signed-off-by: Sandeep Paulraj <s-paul...@ti.com>
Signed-off-by: Scott Wood <scottw...@freescale.com>
---
Applied to u-boot-nand-flash
drivers/mtd/nand/davinci_nand.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 37d8b73..eabaf3e 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -202,7 +202,6 @@ static struct nand_ecclayout
nand_davinci_4bit_layout_oobfirst = {
},
#endif
};
-#endif
static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode)
{
@@ -289,7 +288,6 @@ static int nand_davinci_4bit_calculate_ecc(struct mtd_info
*mtd,
static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
- struct nand_chip *this = mtd->priv;
unsigned short ecc_10bit[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
int i;
unsigned int hw_4ecc[4] = { 0, 0, 0, 0 }, iserror = 0;
@@ -441,6 +439,7 @@ static int nand_davinci_4bit_correct_data(struct mtd_info
*mtd, uint8_t *dat,
return numerrors;
}
+#endif /* CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST */
static int nand_davinci_dev_ready(struct mtd_info *mtd)
{
--
1.6.4.1.184.g2e117
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
