Migration of IFC_BANK_COUNT from Kconfig to config.h avoids adding SoC name in Kconfig as Dependencies. It will help in having all SoC related defines in config.h - easy to maintain.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushw...@nxp.com> --- This patch provide base for defining SYS_FSL_IFC_CLK_DIV required for v3 version of below patch-set http://patchwork.ozlabs.org/patch/666844/ http://patchwork.ozlabs.org/patch/666849/ http://patchwork.ozlabs.org/patch/666848/ README | 3 +++ arch/arm/cpu/armv7/ls102xa/Kconfig | 5 ----- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ------- arch/arm/include/asm/arch-fsl-layerscape/config.h | 4 ++++ arch/arm/include/asm/arch-ls102xa/config.h | 1 + arch/powerpc/include/asm/config_mpc85xx.h | 18 +++++++++--------- drivers/misc/fsl_ifc.c | 2 +- drivers/mtd/nand/fsl_ifc_nand.c | 6 +++--- include/fsl_ifc.h | 20 ++++++++++---------- 9 files changed, 31 insertions(+), 35 deletions(-) diff --git a/README b/README index 68d6a49..c83171a 100644 --- a/README +++ b/README @@ -507,6 +507,9 @@ The following options need to be configured: Board config to use DDR4. It can be enabled for SoCs with DDR4 controllers. + SYS_FSL_IFC_BANK_COUNT + Maximum banks of Integrated flash controller + CONFIG_SYS_FSL_IFC_BE Defines the IFC controller register space as Big Endian diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 28bf778..68d03ab 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -81,9 +81,4 @@ config SYS_FSL_DDR4 help Enable Freescale DDR4 controller. -config SYS_FSL_IFC_BANK_COUNT - int "Maximum banks of Integrated flash controller" - depends on ARCH_LS1021A - default 8 - endmenu diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 94ec8d5..0587559 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -71,13 +71,6 @@ config NUM_DDR_CONTROLLERS default 3 if ARCH_LS2080A default 1 -config SYS_FSL_IFC_BANK_COUNT - int "Maximum banks of Integrated flash controller" - depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A - default 4 if ARCH_LS1043A - default 4 if ARCH_LS1046A - default 8 if ARCH_LS2080A - config SYS_FSL_HAS_DP_DDR bool diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 4201e0f..28d3974 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -27,6 +27,8 @@ #define L1_CACHE_BYTES BIT(L1_CACHE_SHIFT) #endif +#define SYS_FSL_IFC_BANK_COUNT 8 + #define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */ #define CONFIG_SYS_FSL_OCRAM_SIZE 0x00200000 /* 2M */ @@ -150,6 +152,7 @@ /* SoC related */ #ifdef CONFIG_LS1043A +#define SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 7 @@ -187,6 +190,7 @@ #define GICD_BASE 0x01401000 #define GICC_BASE 0x01402000 #elif defined(CONFIG_ARCH_LS1046A) +#define SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 8 diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index ec65cc0..d65f5bf 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -120,6 +120,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A009663 #define CONFIG_SYS_FSL_ERRATUM_A009942 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 +#define SYS_FSL_IFC_BANK_COUNT 8 #else #error SoC not defined #endif diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 6d845e8..073a7b5 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -150,7 +150,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 +#define SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY @@ -590,7 +590,7 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 #define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 +#define SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -612,7 +612,7 @@ #define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 #define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 #define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 +#define SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 @@ -667,7 +667,7 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_PME_CLK 0 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_FM1_CLK 3 #define CONFIG_SYS_FM2_CLK 3 @@ -714,7 +714,7 @@ #define CONFIG_SYS_ULB_CLK 4 #define CONFIG_SYS_ETVPE_CLK 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 +#define SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 @@ -786,7 +786,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_PME_PLAT_CLK_DIV 2 #define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FSL_ERRATUM_A008044 #define CONFIG_SYS_FMAN_V3 #define CONFIG_FM_PLAT_CLK_DIV 1 @@ -838,7 +838,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FM1_CLK 0 #define CONFIG_SYS_SDHC_CLK 0/* Select SDHC CLK begining from PLL1 per rcw field value */ @@ -895,7 +895,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) per rcw field value */ #define CONFIG_SYS_SDHC_CLK_2_PLL /* Select SDHC CLK from 2 PLLs */ #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 @@ -924,7 +924,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_6 -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_A005125 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 3 diff --git a/drivers/misc/fsl_ifc.c b/drivers/misc/fsl_ifc.c index a33efdb..c3e59f0 100644 --- a/drivers/misc/fsl_ifc.c +++ b/drivers/misc/fsl_ifc.c @@ -13,7 +13,7 @@ void print_ifc_regs(void) int i, j; printf("IFC Controller Registers\n"); - for (i = 0; i < CONFIG_SYS_FSL_IFC_BANK_COUNT; i++) { + for (i = 0; i < SYS_FSL_IFC_BANK_COUNT; i++) { printf("CSPR%d:0x%08X\tAMASK%d:0x%08X\tCSOR%d:0x%08X\n", i, get_ifc_cspr(i), i, get_ifc_amask(i), i, get_ifc_csor(i)); diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index bc6bdc9..d3ad210 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -19,11 +19,11 @@ #include <linux/errno.h> #include <fsl_ifc.h> -#ifndef CONFIG_SYS_FSL_IFC_BANK_COUNT -#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 +#ifndef SYS_FSL_IFC_BANK_COUNT +#define SYS_FSL_IFC_BANK_COUNT 4 #endif -#define MAX_BANKS CONFIG_SYS_FSL_IFC_BANK_COUNT +#define MAX_BANKS SYS_FSL_IFC_BANK_COUNT #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index a86f216..29c98a1 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -939,21 +939,21 @@ struct fsl_ifc_gpcm { u32 gpcm_stat; }; -#ifdef CONFIG_SYS_FSL_IFC_BANK_COUNT -#if (CONFIG_SYS_FSL_IFC_BANK_COUNT <= 8) +#ifdef SYS_FSL_IFC_BANK_COUNT +#if (SYS_FSL_IFC_BANK_COUNT <= 8) #define IFC_CSPR_REG_LEN 148 #define IFC_AMASK_REG_LEN 144 #define IFC_CSOR_REG_LEN 144 #define IFC_FTIM_REG_LEN 576 #define IFC_CSPR_USED_LEN sizeof(struct fsl_ifc_cspr) * \ - CONFIG_SYS_FSL_IFC_BANK_COUNT + SYS_FSL_IFC_BANK_COUNT #define IFC_AMASK_USED_LEN sizeof(struct fsl_ifc_amask) * \ - CONFIG_SYS_FSL_IFC_BANK_COUNT + SYS_FSL_IFC_BANK_COUNT #define IFC_CSOR_USED_LEN sizeof(struct fsl_ifc_csor) * \ - CONFIG_SYS_FSL_IFC_BANK_COUNT + SYS_FSL_IFC_BANK_COUNT #define IFC_FTIM_USED_LEN sizeof(struct fsl_ifc_ftim) * \ - CONFIG_SYS_FSL_IFC_BANK_COUNT + SYS_FSL_IFC_BANK_COUNT #else #error IFC BANK count not vaild #endif @@ -991,13 +991,13 @@ struct fsl_ifc_ftim { struct fsl_ifc_fcm { u32 ifc_rev; u32 res1[0x2]; - struct fsl_ifc_cspr cspr_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT]; + struct fsl_ifc_cspr cspr_cs[SYS_FSL_IFC_BANK_COUNT]; u8 res2[IFC_CSPR_REG_LEN - IFC_CSPR_USED_LEN]; - struct fsl_ifc_amask amask_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT]; + struct fsl_ifc_amask amask_cs[SYS_FSL_IFC_BANK_COUNT]; u8 res3[IFC_AMASK_REG_LEN - IFC_AMASK_USED_LEN]; - struct fsl_ifc_csor csor_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT]; + struct fsl_ifc_csor csor_cs[SYS_FSL_IFC_BANK_COUNT]; u8 res4[IFC_CSOR_REG_LEN - IFC_CSOR_USED_LEN]; - struct fsl_ifc_ftim ftim_cs[CONFIG_SYS_FSL_IFC_BANK_COUNT]; + struct fsl_ifc_ftim ftim_cs[SYS_FSL_IFC_BANK_COUNT]; u8 res5[IFC_FTIM_REG_LEN - IFC_FTIM_USED_LEN]; u32 rb_stat; u32 rb_map; -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
