Hi all, According to commit log:
commit 431889d6ad9a39846636716478d504aa7ff976fc Author: Ladislav Michl <la...@linux-mips.org> Date: Tue Jul 12 20:28:14 2016 +0200 spl: zImage support in Falcon mode Other payload than uImage is currently considered to be raw U-Boot image. Check also for zImage in Falcon mode. Signed-off-by: Ladislav Michl <la...@linux-mips.org> Reviewed-by: Heiko Schocher <h...@denx.de> Already include at U-Boot 2016.09.01. I was trying to apply Falcon mode on i.MX6 Sabre SD using zImage instead of uImage. After the steps below I got an error trying to "spl export": # dhcp ${fdt_addr} imx6q-sabresd.dtb # dhcp ${loadaddr} zImage # mmc write ${loadaddr} 0x1000 0x4000 # setenv bootargs 'console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait quiet rw' # spl export fdt ${loadaddr} - ${fdt_addr} i�{���]߬�o����;��]������������o��k5�ك�2s�C�Ǎ������x���ɾ���������6�}��]�0����������֮����m�\�S�������'��;}����ۗ�Ԭ2�[��w<��O����7ە}�v�c�����-�ϥ��������9������w`o��ߎ�ݭ�zoERROR: can't get kernel image! XIP Invalid Image ... OK ERROR: booting os 'Invalid OS' (0) is not supported ERROR: booting os 'Invalid OS' (0) is not supported ERROR: booting os 'Invalid OS' (0) is not supported ERROR prep subcommand failed! Subcommand failed I can't understand this error. Does anybody know how to fix it? Regards, Diego _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot