Hi York,
I have a question about CONFIG option. Are we going to completely using Kconfig
in the future like kernel?
I just found below compiling error.
=============Error log===================
./scripts/check-config.sh u-boot.cfg \
./scripts/config_whitelist.txt . 1>&2
Error: You must add new CONFIG options using Kconfig
The following new ad-hoc CONFIG options were detected:
CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
Please add these via Kconfig instead. Find a suitable Kconfig
file and add a 'config' or 'menuconfig' option.
make: *** [all] Error 1
===========================================
As you know, all CONFIG options of the QorIQ eSDHC driver were defined in
<board>.h.
Should we convert to use Kconfig for eSDHC driver?
Thanks.
Best regards,
Yangbo Lu
> -----Original Message-----
> From: Yangbo Lu [mailto:yangbo...@nxp.com]
> Sent: Tuesday, August 02, 2016 5:21 PM
> To: u-boot@lists.denx.de
> Cc: york sun; Jaehoon Chung; Yangbo Lu
> Subject: [v2, 5/5] arch/arm, arch/powerpc: enable workaround for eSDHC
> erratum A009620
>
> This patch is to enable workaround for eSDHC erratum A009620. All the
> affected platforms include PowerPC(P1010/P2020/P5020/P5040/T1024/T1040/
> T2080/T4240) and ARM(LS1021A/LS1043A/LS2080A).
>
> Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
> ---
> Changes for v2:
> - Added this patch
> - Moved definition out of board files
> ---
> arch/arm/include/asm/arch-fsl-layerscape/config.h | 2 ++
> arch/arm/include/asm/arch-ls102xa/config.h | 1 +
> arch/powerpc/include/asm/config_mpc85xx.h | 8 ++++++++
> 3 files changed, 11 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h
> b/arch/arm/include/asm/arch-fsl-layerscape/config.h
> index b0ad4b4..7f31fcd 100644
> --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
> @@ -32,6 +32,7 @@
> #define CONFIG_NUM_DDR_CONTROLLERS 3
> #define CONFIG_SYS_FSL_HAS_DP_DDR /* Runtime check to confirm */
> #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 }
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define SRDS_MAX_LANES 8
> #define CONFIG_SYS_FSL_SRDS_1
> #define CONFIG_SYS_FSL_SRDS_2
> @@ -175,6 +176,7 @@
> #define CONFIG_SYS_NUM_FM1_DTSEC 7
> #define CONFIG_SYS_NUM_FM1_10GEC 1
> #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define CONFIG_SYS_FSL_DDR_BE
> #define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
> #define CONFIG_MAX_MEM_MAPPED
> CONFIG_SYS_DDR_BLOCK1_SIZE
> diff --git a/arch/arm/include/asm/arch-ls102xa/config.h
> b/arch/arm/include/asm/arch-ls102xa/config.h
> index d408fe4..054f05d 100644
> --- a/arch/arm/include/asm/arch-ls102xa/config.h
> +++ b/arch/arm/include/asm/arch-ls102xa/config.h
> @@ -131,6 +131,7 @@
> #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> #define CONFIG_SYS_FSL_ERRATUM_A008378
> #define CONFIG_SYS_FSL_ERRATUM_A009663
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
> #else
> #error SoC not defined
> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h
> b/arch/powerpc/include/asm/config_mpc85xx.h
> index 505d355..b3d8fe8 100644
> --- a/arch/powerpc/include/asm/config_mpc85xx.h
> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
> @@ -148,6 +148,7 @@
> #define CONFIG_TSECV2
> #define CONFIG_SYS_FSL_SEC_COMPAT 4
> #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define CONFIG_NUM_DDR_CONTROLLERS 1
> #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
> @@ -369,6 +370,7 @@
> #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
> #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define
> CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
> #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
> #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
> @@ -530,6 +532,7 @@
> #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
> #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
> #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define CONFIG_SYS_FSL_ERRATUM_USB14
> #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 #define
> CONFIG_SYS_FSL_ERRATUM_DDR_A003474
> @@ -568,6 +571,7 @@
> #define CONFIG_SYS_FSL_USB2_PHY_ENABLE
> #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
> #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define CONFIG_SYS_FSL_ERRATUM_USB14
> #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 #define
> CONFIG_SYS_FSL_ERRATUM_DDR_A003474
> @@ -686,6 +690,7 @@
> #define CONFIG_SYS_FSL_ERRATUM_A007186
> #define CONFIG_SYS_FSL_ERRATUM_A006593
> #define CONFIG_SYS_FSL_ERRATUM_A007798
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
> #define CONFIG_SYS_FSL_SFP_VER_3_0
> #define CONFIG_SYS_FSL_PCI_VER_3_X
> @@ -802,6 +807,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
> #define CONFIG_SYS_FSL_ERRATUM_A006261
> #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
> #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
> #define QE_MURAM_SIZE 0x6000UL
> #define MAX_QE_RISC 1
> @@ -823,6 +829,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
> #endif #if defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
> #define CONFIG_MAX_CPUS 2
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #elif defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
> #define CONFIG_MAX_CPUS 1
> #endif
> @@ -882,6 +889,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
> #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
> #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
> #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A009620
> #elif defined(CONFIG_PPC_T2081)
> #define CONFIG_SYS_NUM_FM1_DTSEC 6
> #define CONFIG_SYS_NUM_FM1_10GEC 2
> --
> 2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
