On Montag, 17. Oktober 2016 12:11:26 CEST Stephen Warren wrote: > On 10/16/2016 12:17 PM, Stefan Brüns wrote: > > If the parameter set is empty, the pytest setup fails: > > --- > > > > call: <CallInfo when='setup' exception: got empty parameter set > > ['env__dfu_config'], function test_dfu at [...]test_dfu.py:107> > > > > --- > > > > This aborts pytest_runtest_makereport and later leads to an exception > > during the report generation, as the call to log.start_section(...) > > is never executed: > > --- > > > > Exception: Block nesting mismatch: > > "test_dfu[env__usb_dev_port0-env__dfu_config0]" "" > > > > --- > > How do you trigger this? I believe my test setup has many cases where > the test you added would trigger, but without the issues you mention, > but I'm not 100% sure since I don't know for sure what is causing this > issue. > > Which pytest version do you have? I appear to have 2.5.1 (on Ubuntu Trusty)
1. You need "dfu_configs" to be empty 2. Maybe its pytest version dependent, IIRC I have 3.0.2 The first error above can be seen when running pytest with "--debug", it is written to IIRC pytestdebug.log Kind regards, Stefan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
