Hi Alex, > -----Original Message----- > From: Alexander Graf [mailto:ag...@suse.de] > Sent: Saturday, October 15, 2016 3:33 PM > To: u-boot@lists.denx.de > Cc: york sun <york....@nxp.com>; Prabhakar Kushwaha > <prabhakar.kushw...@nxp.com> > Subject: [PATCH v5 1/7] ls2080: Exit dpaa only right before exiting U-Boot > > On ls2080 we have a separate network fabric component which we need to > shut down before we enter Linux (or any other OS). Along with that also > comes configuration of the fabric using a description file. > > Today we always stop and configure the fabric in the boot script and > (again) exit it on device tree generation. This works ok for the normal > booti case, but with bootefi the payload we're running may still want to > access the network. > > So let's add a new fsl_mc command that defers configuration and stopping > the hardware to when we actually exit U-Boot, so that we can still use > the fabric from an EFI payload. > > For existing boot scripts, nothing should change with this patch. > > Signed-off-by: Alexander Graf <ag...@suse.de> >
Can we get one small modification in this patch to include env variable. So if a user **always** want " lazyapply", this info can be stored in env variable. This env variable will be used after reset without explicit u-boot command. --prabhakara _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot