On 10/13/2016 10:33 AM, Chin Liang See wrote:
> Separate the Clock Manager to support both GEN5 SoC and
> Stratix 10 SoC.
> 
> Signed-off-by: Chin Liang See <cl...@altera.com>
> Cc: Marek Vasut <ma...@denx.de>
> Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> Cc: Ley Foon Tan <lf...@altera.com>
> Cc: Tien Fong Chee <tfc...@altera.com>
> ---
>  arch/arm/mach-socfpga/clock_manager.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/mach-socfpga/clock_manager.c 
> b/arch/arm/mach-socfpga/clock_manager.c
> index aa71636..0d67b3c 100644
> --- a/arch/arm/mach-socfpga/clock_manager.c
> +++ b/arch/arm/mach-socfpga/clock_manager.c
> @@ -10,6 +10,7 @@
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  static const struct socfpga_clock_manager *clock_manager_base =
>       (struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
>  
> @@ -446,9 +447,11 @@ unsigned int cm_get_l4_sp_clk_hz(void)
>  
>       return clock;
>  }
> +#endif /* CONFIG_TARGET_SOCFPGA_GEN5 */
>  
>  unsigned int cm_get_mmc_controller_clk_hz(void)
>  {
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>       uint32_t reg, clock = 0;
>  
>       /* identify the source of MMC clock */
> @@ -475,8 +478,12 @@ unsigned int cm_get_mmc_controller_clk_hz(void)
>       /* further divide by 4 as we have fixed divider at wrapper */
>       clock /= 4;
>       return clock;
> +#elif defined(CONFIG_TARGET_SOCFPGA_STRATIX10)
> +     return 25000000;

Is this always gonna be the case or is this S10VP specific ?

> +#endif /* CONFIG_TARGET_SOCFPGA_GEN5 */
>  }
>  
> +#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>  unsigned int cm_get_qspi_controller_clk_hz(void)
>  {
>       uint32_t reg, clock = 0;
> @@ -556,3 +563,4 @@ U_BOOT_CMD(
>       "display clocks",
>       ""

Why does the clock display not work on S10 ? Are some functions missing?

Maybe we should split the clock manager into common part and then gen5
and gen10 specific parts ?

>  );
> +#endif /* CONFIG_TARGET_SOCFPGA_GEN5 */
> 


-- 
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to