On 10/13/2016 11:45 PM, Yao Yuan wrote: > On 10/12/2016 08:00 PM, York Sun wrote: >> On 10/11/2016 08:00 PM, Yao Yuan wrote: >>>> >>>> Yuan Yao, >>>> >>>> I think the procedure can be applied to many of our boards with QSPI, >>>> right? It may be better to move this information out of ls2080aqds. >>>> >>> >>> Hi York, >>> >>> Yes, but a little difference for "CCSR write" for different boards. >>> But the "CCSR write" should be wrote into uboot code or cw. >>> So, should I remove the notes for "CCSR write" and then move this >>> information for all the boards which support QSPI boot? >>> >> >> I think you can put the common practice together with specific examples for >> LS2080A, and other SoCs. >> > > Hi York, > > If move this information out of ls2080aqds. > Do you think where can I put the procedure for all the boards? > In every board's README or somewhere for the common procedure? >
Yao, Take a look at these locations and decide which one fits best. arch/arm/cpu/armv8/fsl-layerscape/doc/README.* doc/README.fsl-qspi (you can create this) York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot