On 6 October 2016 at 08:28, Przemyslaw Marczak <p.marc...@samsung.com> wrote: > Hello, > > > On 10/05/2016 06:50 PM, Simon Glass wrote: >> >> Hi Keerthy, >> >> On 5 October 2016 at 05:58, Keerthy <a0393...@ti.com> wrote: >>> >>> >>> On Monday 19 September 2016 06:29 AM, Simon Glass wrote: >>>> >>>> On 15 September 2016 at 05:34, Keerthy <j-keer...@ti.com> wrote: >>>>> >>>>> Add support for gpio regulators. As of now this driver caters >>>>> to gpio regulators with one gpio. Supports setting voltage values to >>>>> gpio >>>>> regulators and retrieving the values. >>>>> >>>>> Signed-off-by: Keerthy <j-keer...@ti.com> >>>>> --- >>>>> >>>>> Changes in v2: >>>>> >>>>> * Added states and voltages as part of plat data to have >>>>> a generic state to voltage mapping removing any assumptions. >>>>> >>>>> drivers/power/regulator/Kconfig | 8 ++ >>>>> drivers/power/regulator/Makefile | 1 + >>>>> drivers/power/regulator/gpio-regulator.c | 137 >>>>> +++++++++++++++++++++++++++++++ >>>>> include/power/regulator.h | 1 + >>>>> 4 files changed, 147 insertions(+) >>>>> create mode 100644 drivers/power/regulator/gpio-regulator.c >>>> >>>> >>>> Reviewed-by: Simon Glass <s...@chromium.org> >>> >>> >>> Simon, >>> >>> Wanted to know who is pulling this patch. >> >> Looking in patchwork it is assigned to Przemyslaw. >> >> Regards, >> Simon >> >> >> > > I'm sorry for the silence, I have very limited time for open source at > present, and now it's hard for me to watch the list. > Simon, I will assign it to you in patchwork, since you have already done the > review.
Applied to u-boot-dm, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
