Hi Simon,
On Thu, Oct 6, 2016 at 4:25 PM, Jagan Teki <jt...@openedev.com> wrote:
> From: Jagan Teki <ja...@amarulasolutions.com>
>
> This patch add driver model support for fec_mxc driver.
>
> Cc: Simon Glass <s...@chromium.org>
> Cc: Joe Hershberger <joe.hershber...@ni.com>
> Cc: Peng Fan <peng....@nxp.com>
> Cc: Stefano Babic <sba...@denx.de>
> Cc: Michael Trimarchi <mich...@amarulasolutions.com>
> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
> ---
> drivers/net/fec_mxc.c | 314
> ++++++++++++++++++++++++++++++++++++++++++--------
> drivers/net/fec_mxc.h | 4 +
> 2 files changed, 271 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index 0838d58..c0ec976 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -9,6 +9,7 @@
> */
>
> #include <common.h>
> +#include <dm.h>
> #include <malloc.h>
> #include <memalign.h>
> #include <net.h>
> @@ -368,11 +369,8 @@ static int fec_get_hwaddr(int dev_id, unsigned char *mac)
> return !is_valid_ethaddr(mac);
> }
>
> -static int fec_set_hwaddr(struct eth_device *dev)
> +static int _fec_set_hwaddr(struct fec_priv *fec, uchar *mac)
> {
> - uchar *mac = dev->enetaddr;
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> -
> writel(0, &fec->eth->iaddr1);
> writel(0, &fec->eth->iaddr2);
> writel(0, &fec->eth->gaddr1);
> @@ -426,9 +424,8 @@ static void fec_reg_setup(struct fec_priv *fec)
> * Start the FEC engine
> * @param[in] dev Our device to handle
> */
> -static int fec_open(struct eth_device *edev)
> +static int fec_open(struct fec_priv *fec)
> {
> - struct fec_priv *fec = (struct fec_priv *)edev->priv;
> int speed;
> uint32_t addr, size;
> int i;
> @@ -534,14 +531,13 @@ static int fec_open(struct eth_device *edev)
> return 0;
> }
>
> -static int fec_init(struct eth_device *dev, bd_t* bd)
> +static int _fec_init(struct fec_priv *fec, uchar *mac)
> {
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
> int i;
>
> /* Initialize MAC address */
> - fec_set_hwaddr(dev);
> + _fec_set_hwaddr(fec, mac);
>
> /*
> * Setup transmit descriptors, there are two in total.
> @@ -587,7 +583,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
> if (fec->xcv_type != SEVENWIRE)
> miiphy_restart_aneg(dev);
> #endif
> - fec_open(dev);
> + fec_open(fec);
> return 0;
> }
>
> @@ -595,9 +591,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
> * Halt the FEC engine
> * @param[in] dev Our device to handle
> */
> -static void fec_halt(struct eth_device *dev)
> +static void _fec_halt(struct fec_priv *fec)
> {
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> int counter = 0xffff;
>
> /*
> @@ -637,7 +632,7 @@ static void fec_halt(struct eth_device *dev)
> * @param[in] length Data count in bytes
> * @return 0 on success
> */
> -static int fec_send(struct eth_device *dev, void *packet, int length)
> +static int _fec_send(struct fec_priv *fec, void *packet, int length)
> {
> unsigned int status;
> uint32_t size, end;
> @@ -649,8 +644,6 @@ static int fec_send(struct eth_device *dev, void *packet,
> int length)
> * This routine transmits one frame. This routine only accepts
> * 6-byte Ethernet addresses.
> */
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> -
> /*
> * Check for valid length of data.
> */
> @@ -777,14 +770,14 @@ out:
> return ret;
> }
>
> +
> /**
> * Pull one frame from the card
> * @param[in] dev Our ethernet device to handle
> * @return Length of packet read
> */
> -static int fec_recv(struct eth_device *dev)
> +static int _fec_recv(struct fec_priv *fec, uchar *mac)
> {
> - struct fec_priv *fec = (struct fec_priv *)dev->priv;
> struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index];
> unsigned long ievent;
> int frame_length, len = 0;
> @@ -800,8 +793,8 @@ static int fec_recv(struct eth_device *dev)
> writel(ievent, &fec->eth->ievent);
> debug("fec_recv: ievent 0x%lx\n", ievent);
> if (ievent & FEC_IEVENT_BABR) {
> - fec_halt(dev);
> - fec_init(dev, fec->bd);
> + _fec_halt(fec);
> + _fec_init(fec, mac);
> printf("some error: 0x%08lx\n", ievent);
> return 0;
> }
> @@ -813,10 +806,10 @@ static int fec_recv(struct eth_device *dev)
> if (ievent & FEC_IEVENT_GRA) {
> /* Graceful stop complete */
> if (readl(&fec->eth->x_cntrl) & 0x00000001) {
> - fec_halt(dev);
> + _fec_halt(fec);
> writel(~0x00000001 & readl(&fec->eth->x_cntrl),
> &fec->eth->x_cntrl);
> - fec_init(dev, fec->bd);
> + _fec_init(fec, mac);
> }
> }
>
> @@ -970,6 +963,71 @@ static void fec_free_descs(struct fec_priv *fec)
> free(fec->tbd_base);
> }
>
> +struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
> +{
> + struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
> + struct mii_dev *bus;
> + int ret;
> +
> + bus = mdio_alloc();
> + if (!bus) {
> + printf("mdio_alloc failed\n");
> + return NULL;
> + }
> + bus->read = fec_phy_read;
> + bus->write = fec_phy_write;
> + bus->priv = eth;
> + fec_set_dev_name(bus->name, dev_id);
> +
> + ret = mdio_register(bus);
> + if (ret) {
> + printf("mdio_register failed\n");
> + free(bus);
> + return NULL;
> + }
> + fec_mii_setspeed(eth);
> + return bus;
> +}
> +
> +#ifndef CONFIG_DM_ETH
> +static int fec_recv(struct eth_device *dev)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> + uchar *mac = dev->enetaddr;
> +
> + return _fec_recv(fec, mac);
> +}
> +
> +static int fec_send(struct eth_device *dev, void *packet, int length)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> +
> + return _fec_send(fec, packet, length);
> +}
> +
> +static void fec_halt(struct eth_device *dev)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> +
> + _fec_halt(fec);
> +}
> +
> +static int fec_set_hwaddr(struct eth_device *dev)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> + uchar *mac = dev->enetaddr;
> +
> + return _fec_set_hwaddr(fec, mac);
> +}
> +
> +static int fec_init(struct eth_device *dev, bd_t *bd)
> +{
> + struct fec_priv *fec = (struct fec_priv *)dev->priv;
> + uchar *mac = dev->enetaddr;
> +
> + return _fec_init(fec, mac);
> +}
> +
> #ifdef CONFIG_PHYLIB
> int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
> struct mii_dev *bus, struct phy_device *phydev)
> @@ -1061,32 +1119,6 @@ err1:
> return ret;
> }
>
> -struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
> -{
> - struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
> - struct mii_dev *bus;
> - int ret;
> -
> - bus = mdio_alloc();
> - if (!bus) {
> - printf("mdio_alloc failed\n");
> - return NULL;
> - }
> - bus->read = fec_phy_read;
> - bus->write = fec_phy_write;
> - bus->priv = eth;
> - fec_set_dev_name(bus->name, dev_id);
> -
> - ret = mdio_register(bus);
> - if (ret) {
> - printf("mdio_register failed\n");
> - free(bus);
> - return NULL;
> - }
> - fec_mii_setspeed(eth);
> - return bus;
> -}
> -
> int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
> {
> uint32_t base_mii;
> @@ -1146,3 +1178,191 @@ int fecmxc_register_mii_postcall(struct eth_device
> *dev, int (*cb)(int))
> return 0;
> }
> #endif
> +
> +#else
> +
> +static int fec_set_hwaddr(struct udevice *dev)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + uchar *mac = pdata->enetaddr;
> +
> + return _fec_set_hwaddr(fec, mac);
> +}
> +
> +static void fec_halt(struct udevice *dev)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> +
> + _fec_halt(fec);
> +}
> +
> +static int fec_recv(struct udevice *dev, int flags, uchar **packetp)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + uchar *mac = pdata->enetaddr;
> +
> + return _fec_recv(fec, mac);
> +}
> +
> +static int fec_send(struct udevice *dev, void *packet, int length)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> +
> + return _fec_send(fec, packet, length);
> +}
> +
> +static int fec_init(struct udevice *dev)
> +{
> + struct fec_priv *fec = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> + uchar *mac = pdata->enetaddr;
> +
> + return _fec_init(fec, mac);
> +}
This look OK now, let me know if you have any inputs.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
