A simple introduction.
Signed-off-by: Jacob Chen <jacob2.c...@rock-chips.com>
Acked-by: Simon Glass <s...@chromium.org>
---
Changes in v2: None
doc/README.rockchip | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 69b926c..06ec80e 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -149,7 +149,6 @@ Note: rk3036 SDMMC and debug uart use the same iomux, so if
you boot from SD, th
Using fastboot on rk3288
========================
-- Define GPT partition layout like kylin_rk3036(see
include/configs/kylin_rk3036.h)
- Write GPT partition layout to mmc device which fastboot want to use it to
store the image
@@ -212,7 +211,6 @@ When booting you should see something like:
Err: serial@ff690000
=>
-
Future work
===========
@@ -298,6 +296,15 @@ overhead and in SPL with a 32KB size limit some shortcuts
have been taken.
In general all Rockchip drivers should use these features, with SPL-specific
modifications where required.
+GPT partition layout
+----------------------------
+
+Rockchip use a unified GPT partition layout in open source support.
+With this GPT partition layout, uboot can be compatilbe with other components,
+like miniloader, trusted-os, arm-trust-firmware.
+
+There are some documents about partitions in the links below.
+http://rockchip.wikidot.com/partitions
--
Simon Glass <s...@chromium.org>
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
