Hello Simon,
Am 03.10.2016 um 02:01 schrieb Simon Glass:
CONFIG_SYS_NUM_I2C_ADAPTERS and CONFIG_SYS_I2C_MULTI_NOPROBES are not used
in U-Boot, so drop them.
Signed-off-by: Simon Glass <s...@chromium.org>
---
README | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
Thanks!
Acked-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
diff --git a/README b/README
index 0c90415..614a81c 100644
--- a/README
+++ b/README
@@ -2326,10 +2326,7 @@ CBFS (Coreboot Filesystem) support
additional defines:
CONFIG_SYS_NUM_I2C_BUSES
- Hold the number of i2c buses you want to use. If you
- don't use/have i2c muxes on your i2c bus, this
- is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
- omit this define.
+ Hold the number of i2c buses you want to use.
CONFIG_SYS_I2C_DIRECT_BUS
define this, if you don't use i2c muxes on your hardware.
@@ -2543,7 +2540,7 @@ CBFS (Coreboot Filesystem) support
will skip addresses 0x50 and 0x68 on a board with one I2C bus
#define CONFIG_I2C_MULTI_BUS
- #define CONFIG_SYS_I2C_MULTI_NOPROBES
{{0,0x50},{0,0x68},{1,0x54}}
+ #define CONFIG_SYS_I2C_NOPROBES
{{0,0x50},{0,0x68},{1,0x54}}
will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on
bus 1
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot