Add a new Kconfig option to allow CPU drivers to be used in SPL.

Signed-off-by: Simon Glass <s...@chromium.org>
---

 common/spl/Kconfig | 10 ++++++++++
 drivers/Makefile   |  1 +
 2 files changed, 11 insertions(+)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 84670b1..3c33c9e 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -123,6 +123,16 @@ config SPL_SHA256_SUPPORT
          SHA256 variant is supported: SHA512 and others are not currently
          supported in U-Boot.
 
+config SPL_CPU_SUPPORT
+       bool "Support CPU drivers"
+       depends on SPL
+       help
+         Enable this to support CPU drivers in SPL. These drivers can set
+         up CPUs and provide information about them such as the model and
+         name. This can be useful in SPL since setting up the CPUs earlier
+         may improve boot performance. Enable this option to build the
+         drivers in drivers/cpu as part of an SPL build.
+
 config SPL_CRYPTO_SUPPORT
        bool "Support crypto drivers"
        depends on SPL
diff --git a/drivers/Makefile b/drivers/Makefile
index ca98273..b4fd0c4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_$(SPL_)RAM)      += ram/
 
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
-- 
2.8.0.rc3.226.g39d4020

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to