This series introduces binman, a tool designed to create firmware images. It provides a way to bring together various binaries and place them in an image, at particular positions and with configurable alignment.
Packaging of firmware is quite a different task from building the various parts. In many cases the various binaries which go into the image come from separate build systems. For example, ARM Trusted Firmware is used on ARMv8 devices but is not built in the U-Boot tree. If a Linux kernel is included in the firmware image, it is built elsewhere. It is of course possible to add more and more build rules to the U-Boot build system to cover these cases. It can shell out to other Makefiles and build scripts. But it seems better to create a clear divide between building software and packaging it. U-Boot supports a very large number of boards. Many of these have their own specific rules for how an image should be put together so that it boots correctly. At present these rules are described by manual instructions, different for each board. By turning these instructions into a standard format, we can support making valid images for any board without manual effort, lots of READMEs, etc. Images consist of a number of entries which are combined to make up the final image. The image is described in the device tree for the board, meaning that it can be accessed at run-time if desired. Binman is an extensible tool. A set of standard entries is provides, but new entries can be created fairly easily. Entries can be as simple as providing the name of a file to include. They can also handle more complex requirements, such as adjusting the input file or reading header information from one entry to control the position of another. U-Boot's mkimage builds FIT images and various other binaries. Binman augments this by allowing these binaries to be packed together. While FIT should be used where possible, it cannot be used everywhere. For example, many devices require executable code at a particular offset in the image. X86 machines require lots of binary blobs at particular places, and a microcode collection easily accessible at boot. So far binman has enough functionality to be useful, but apart from a few RFC patches, no attempt is made to switch boards over to use it. There should be enough material to permit review and comments. The series is available at u-boot-dm/binman-working Future work and missing features are documented in the README. Changes in v2: - Add a new patch to fix a bug in GetProp() - Add new patch to adjust GetProps() in fdt_normal to use the node path - Add a new patch to allow testing of the fallback Fdt library - Add test for code coverage - drop the unused __len__() method - Fix the -b option - Add automated test coverage - Various changes and improvements based on using this tool for a while - Put the binman definition in a common file for x86 Simon Glass (12): dtoc: Fix bug in GetProp() dtoc: Adjust GetProps() in fdt_normal to use the node path dtoc: Add a way for tests to request the fallback library binman: Introduce binman, a tool for building binary images binman: Add basic entry types for U-Boot binman: Add support for building x86 ROMs binman: Add support for u-boot.img as an input binary binman: Add support for building x86 ROMs with SPL binman: Add a build rule for binman binman: Allow configuration options to be used in .dts files RFC: Use binman for a sunxi board RFC: Use binman for an x86 board Makefile | 55 +- arch/arm/dts/sun7i-a20-pcduino3.dts | 12 + arch/x86/dts/binman.dtsi | 62 ++ arch/x86/dts/chromebook_link.dts | 1 + scripts/Makefile.lib | 5 + tools/binman/.gitignore | 1 + tools/binman/README | 491 +++++++++++++ tools/binman/binman | 1 + tools/binman/binman.py | 116 ++++ tools/binman/cmdline.py | 53 ++ tools/binman/control.py | 118 ++++ tools/binman/entry_test.py | 27 + tools/binman/etype/_testing.py | 26 + tools/binman/etype/blob.py | 37 + tools/binman/etype/entry.py | 190 +++++ tools/binman/etype/intel_descriptor.py | 55 ++ tools/binman/etype/intel_me.py | 17 + tools/binman/etype/intel_mrc.py | 17 + tools/binman/etype/intel_vga.py | 17 + tools/binman/etype/u_boot.py | 17 + tools/binman/etype/u_boot_dtb.py | 17 + tools/binman/etype/u_boot_dtb_with_ucode.py | 72 ++ tools/binman/etype/u_boot_img.py | 17 + tools/binman/etype/u_boot_nodtb.py | 17 + tools/binman/etype/u_boot_spl.py | 17 + tools/binman/etype/u_boot_spl_bss_pad.py | 26 + tools/binman/etype/u_boot_spl_with_ucode_ptr.py | 28 + tools/binman/etype/u_boot_ucode.py | 77 +++ tools/binman/etype/u_boot_with_ucode_ptr.py | 73 ++ tools/binman/etype/x86_start16.py | 17 + tools/binman/etype/x86_start16_spl.py | 17 + tools/binman/fdt_test.py | 48 ++ tools/binman/func_test.py | 763 +++++++++++++++++++++ tools/binman/image.py | 229 +++++++ tools/binman/test/01_invalid.dts | 5 + tools/binman/test/02_missing_node.dts | 6 + tools/binman/test/03_empty.dts | 9 + tools/binman/test/04_invalid_entry.dts | 11 + tools/binman/test/05_simple.dts | 11 + tools/binman/test/06_dual_image.dts | 22 + tools/binman/test/07_bad_align.dts | 12 + tools/binman/test/08_pack.dts | 30 + tools/binman/test/09_pack_extra.dts | 35 + tools/binman/test/10_pack_align_power2.dts | 12 + tools/binman/test/11_pack_align_size_power2.dts | 12 + tools/binman/test/12_pack_inv_align.dts | 13 + tools/binman/test/13_pack_inv_size_align.dts | 13 + tools/binman/test/14_pack_overlap.dts | 16 + tools/binman/test/15_pack_overflow.dts | 12 + tools/binman/test/16_pack_image_overflow.dts | 13 + tools/binman/test/17_pack_image_size.dts | 13 + tools/binman/test/18_pack_image_align.dts | 13 + tools/binman/test/19_pack_inv_image_align.dts | 14 + .../binman/test/20_pack_inv_image_align_power2.dts | 13 + tools/binman/test/21_image_pad.dts | 16 + tools/binman/test/22_image_name.dts | 21 + tools/binman/test/23_blob.dts | 12 + tools/binman/test/24_sorted.dts | 17 + tools/binman/test/25_pack_zero_size.dts | 15 + tools/binman/test/26_pack_u_boot_dtb.dts | 14 + tools/binman/test/27_pack_4gb_no_size.dts | 18 + tools/binman/test/28_pack_4gb_outside.dts | 19 + tools/binman/test/29_x86-rom.dts | 19 + tools/binman/test/30_x86-rom-me-no-desc.dts | 15 + tools/binman/test/31_x86-rom-me.dts | 18 + tools/binman/test/32_intel-vga.dts | 13 + tools/binman/test/33_x86-start16.dts | 13 + tools/binman/test/34_x86_ucode.dts | 29 + tools/binman/test/35_x86_single_ucode.dts | 26 + tools/binman/test/36_u_boot_img.dts | 11 + tools/binman/test/37_x86_no_ucode.dts | 20 + tools/binman/test/38_x86_ucode_missing_node.dts | 26 + tools/binman/test/39_x86_ucode_missing_node2.dts | 23 + tools/binman/test/40_x86_ucode_not_in_image.dts | 28 + tools/binman/test/41_unknown_pos_size.dts | 11 + tools/binman/test/u_boot_no_ucode_ptr | Bin 0 -> 4182 bytes tools/binman/test/u_boot_no_ucode_ptr.c | 15 + tools/binman/test/u_boot_ucode_ptr | Bin 0 -> 4175 bytes tools/binman/test/u_boot_ucode_ptr.c | 15 + tools/binman/test/u_boot_ucode_ptr.lds | 18 + tools/dtoc/fdt_fallback.py | 2 +- tools/dtoc/fdt_normal.py | 9 +- tools/dtoc/fdt_select.py | 16 +- 83 files changed, 3425 insertions(+), 55 deletions(-) create mode 100644 arch/x86/dts/binman.dtsi create mode 100644 tools/binman/.gitignore create mode 100644 tools/binman/README create mode 120000 tools/binman/binman create mode 100755 tools/binman/binman.py create mode 100644 tools/binman/cmdline.py create mode 100644 tools/binman/control.py create mode 100644 tools/binman/entry_test.py create mode 100644 tools/binman/etype/_testing.py create mode 100644 tools/binman/etype/blob.py create mode 100644 tools/binman/etype/entry.py create mode 100644 tools/binman/etype/intel_descriptor.py create mode 100644 tools/binman/etype/intel_me.py create mode 100644 tools/binman/etype/intel_mrc.py create mode 100644 tools/binman/etype/intel_vga.py create mode 100644 tools/binman/etype/u_boot.py create mode 100644 tools/binman/etype/u_boot_dtb.py create mode 100644 tools/binman/etype/u_boot_dtb_with_ucode.py create mode 100644 tools/binman/etype/u_boot_img.py create mode 100644 tools/binman/etype/u_boot_nodtb.py create mode 100644 tools/binman/etype/u_boot_spl.py create mode 100644 tools/binman/etype/u_boot_spl_bss_pad.py create mode 100644 tools/binman/etype/u_boot_spl_with_ucode_ptr.py create mode 100644 tools/binman/etype/u_boot_ucode.py create mode 100644 tools/binman/etype/u_boot_with_ucode_ptr.py create mode 100644 tools/binman/etype/x86_start16.py create mode 100644 tools/binman/etype/x86_start16_spl.py create mode 100644 tools/binman/fdt_test.py create mode 100644 tools/binman/func_test.py create mode 100644 tools/binman/image.py create mode 100644 tools/binman/test/01_invalid.dts create mode 100644 tools/binman/test/02_missing_node.dts create mode 100644 tools/binman/test/03_empty.dts create mode 100644 tools/binman/test/04_invalid_entry.dts create mode 100644 tools/binman/test/05_simple.dts create mode 100644 tools/binman/test/06_dual_image.dts create mode 100644 tools/binman/test/07_bad_align.dts create mode 100644 tools/binman/test/08_pack.dts create mode 100644 tools/binman/test/09_pack_extra.dts create mode 100644 tools/binman/test/10_pack_align_power2.dts create mode 100644 tools/binman/test/11_pack_align_size_power2.dts create mode 100644 tools/binman/test/12_pack_inv_align.dts create mode 100644 tools/binman/test/13_pack_inv_size_align.dts create mode 100644 tools/binman/test/14_pack_overlap.dts create mode 100644 tools/binman/test/15_pack_overflow.dts create mode 100644 tools/binman/test/16_pack_image_overflow.dts create mode 100644 tools/binman/test/17_pack_image_size.dts create mode 100644 tools/binman/test/18_pack_image_align.dts create mode 100644 tools/binman/test/19_pack_inv_image_align.dts create mode 100644 tools/binman/test/20_pack_inv_image_align_power2.dts create mode 100644 tools/binman/test/21_image_pad.dts create mode 100644 tools/binman/test/22_image_name.dts create mode 100644 tools/binman/test/23_blob.dts create mode 100644 tools/binman/test/24_sorted.dts create mode 100644 tools/binman/test/25_pack_zero_size.dts create mode 100644 tools/binman/test/26_pack_u_boot_dtb.dts create mode 100644 tools/binman/test/27_pack_4gb_no_size.dts create mode 100644 tools/binman/test/28_pack_4gb_outside.dts create mode 100644 tools/binman/test/29_x86-rom.dts create mode 100644 tools/binman/test/30_x86-rom-me-no-desc.dts create mode 100644 tools/binman/test/31_x86-rom-me.dts create mode 100644 tools/binman/test/32_intel-vga.dts create mode 100644 tools/binman/test/33_x86-start16.dts create mode 100644 tools/binman/test/34_x86_ucode.dts create mode 100644 tools/binman/test/35_x86_single_ucode.dts create mode 100644 tools/binman/test/36_u_boot_img.dts create mode 100644 tools/binman/test/37_x86_no_ucode.dts create mode 100644 tools/binman/test/38_x86_ucode_missing_node.dts create mode 100644 tools/binman/test/39_x86_ucode_missing_node2.dts create mode 100644 tools/binman/test/40_x86_ucode_not_in_image.dts create mode 100644 tools/binman/test/41_unknown_pos_size.dts create mode 100755 tools/binman/test/u_boot_no_ucode_ptr create mode 100644 tools/binman/test/u_boot_no_ucode_ptr.c create mode 100755 tools/binman/test/u_boot_ucode_ptr create mode 100644 tools/binman/test/u_boot_ucode_ptr.c create mode 100644 tools/binman/test/u_boot_ucode_ptr.lds -- 2.8.0.rc3.226.g39d4020 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot