Hi,
On 19-09-16 17:00, Tom Rini wrote:
On Mon, Sep 19, 2016 at 04:53:04PM +0200, Hans de Goede wrote:
Hi,
On 19-09-16 16:03, Tom Rini wrote:
Based on A13-OLinuXino, enable DFU and UMS support.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
With this change I've added DFU to my tests on this board, and assuming a
follow up test with the SD image that kicks the board into FEL works, I'll
then enable the UMS tests on this board (and add DFU to SD, not just DFU to
RAM).
configs/A20-OLinuXino-Lime2_defconfig | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/configs/A20-OLinuXino-Lime2_defconfig
b/configs/A20-OLinuXino-Lime2_defconfig
index 23db07380624..54343de7f351 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -12,9 +12,17 @@
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_DFU=y
+CONFIG_CMD_USB_MASS_STORAGE=y
Do you need CMD_USB_MASS_STORAGE for your tests ? Enabling
CMD_USB_MASS_STORAGE really seems orthogonal to enabling GADGET
mode to me, esp. since it is only useful in host mode AFAICT.
Ah, no, things have bad names perhaps. CMD_USB_MASS_STORAGE enables
"ums" as a command which is what in turn will export MMC (or something
else) as a USB mass storage gadget over to the host.
Ah, I thought this enabled the (destructive) low level usb mass storage
block read/write test commands, but I guess I'm wrong.
I wonder why Chen-Yu put it in the usb host enabling patch for
an A33 board then...
Chen-Yu did something similar in a patch enabling host mode for a
different sunxi board and here is what I replied:
"
If we want to enable CONFIG_CMD_USB_MASS_STORAGE on sunxi, we really
should do so on all boards (feel free to submit a patch for this).
e.g. add something like this to board/sunxi/Kconfig:
config CMD_USB_MASS_STORAGE
default y
Given the above, that should probably be:
config CMD_USB_MASS_STORAGE
default y if USB_GADGET
Hmm, I guess we may want to have a bunch of those, so that
simply adding:
CONFIG_USB_MUSB_GADGET=y
To a defconfig enables the relevant related options...
Regards,
Hans
So that we can still disable it in case there are space constraints,
but normally we enable it on all sunxi boards offering a
consistent set of available commands.
"
I think it's a useful command that should be more widely exposed, yes.
IIRC, it's how the Tegra platforms support flashing their dev boards
with official images, and can be a handy "rescue" type option too.
The same goes for this patch, otherwise this patch is:
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Ig you want to feel free to apply this directly
(given that I've send out a sunxi pull-req recently).
OK, thanks. I just might since I really want to move on to grabbing
some fs patches and before I do that I really want to have as much
testing of them as possible.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
