Hi Jagan, On Sat, Sep 17, 2016 at 02:18:34AM +0530, Jagan Teki wrote: >Added kconfig for MXC_UART driver. > >Cc: Simon Glass <s...@chromium.org> >Cc: Fabio Estevam <fabio.este...@nxp.com> >Cc: Stefano Babic <sba...@denx.de> >Cc: Peng Fan <peng....@nxp.com> >Cc: Matteo Lisi <matteo.l...@engicam.com> >Cc: Michael Trimarchi <mich...@amarulasolutions.com> >Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> >--- > drivers/serial/Kconfig | 7 +++++++ > 1 file changed, 7 insertions(+) > >diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig >index ab5df70..9abf158 100644 >--- a/drivers/serial/Kconfig >+++ b/drivers/serial/Kconfig >@@ -295,6 +295,13 @@ config FSL_LPUART > Select this to enable a Low Power UART for Freescale VF610 and > QorIQ Layerscape devices. > >+config MXC_UART >+ bool "IMX serial port support" >+ depends on MX6
Not only MX6. I think this line could be removed. Add "selects MXC_UART" in arch/arm/cpu/armv7/mx6/Kconfig or just add "CONFIG_MXC_UART" in defconfig. Regards, Peng. >+ help >+ If you have a machine based on a Motorola IMX CPU you >+ can enable its onboard serial port by enabling this option. >+ > config PIC32_SERIAL > bool "Support for Microchip PIC32 on-chip UART" > depends on DM_SERIAL && MACH_PIC32 >-- >2.7.4 > >_______________________________________________ >U-Boot mailing list >U-Boot@lists.denx.de >http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
