Convert to use the drivers which support the driver model and use the
device tree. And add the support to enable an early debug UART for
debugging.

It is based on the following patches:
  - [PATCH v2] i2c: at91_i2c: Fix the wrong include file
        http://lists.denx.de/pipermail/u-boot/2016-September/266413.html
  - [PATCH v2] clk: at91: Fix at91-pmc and at91-sckc's class ID
        http://lists.denx.de/pipermail/u-boot/2016-September/266408.html
  - [PATCH v2] mmc: mmc-uclass: Add mmc_init() in mmc preinit phrase
        http://lists.denx.de/pipermail/u-boot/2016-September/266409.html
  - [PATCH v2 0/2] serial: atmel_usart: Support to enable an early debug UART
        http://lists.denx.de/pipermail/u-boot/2016-September/266410.html
  - [PATCH v9] dm: at91: Add driver model support for the spi driver
        http://lists.denx.de/pipermail/u-boot/2016-September/266407.html
  - [PATCH] sf: fix sf probe
        http://lists.denx.de/pipermail/u-boot/2016-August/264104.html

Changes in v2:
 - Collect Reviewed-by tags.

Wenyou Yang (4):
  board: sama5d2_xplained: Move config options to defconfigs
  board: sama5d2_xplained: Clean up code
  board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC
  board: sama5d2_xplained: Enable an early debug UART

 board/atmel/sama5d2_xplained/sama5d2_xplained.c | 167 +++++++++---------------
 configs/sama5d2_xplained_mmc_defconfig          |  37 +++++-
 configs/sama5d2_xplained_spiflash_defconfig     |  38 +++++-
 include/configs/sama5d2_xplained.h              |  32 +----
 4 files changed, 145 insertions(+), 129 deletions(-)

-- 
2.7.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to