[U-Boot] [PATCH v3 2/2] pbl: use "wait" command instead of "flush" command

[Zhao Qiang]

FLUSH command is restricted to CCSR board. So use WAIT
command in case of non-CCSR board.

Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>
---
Changes for v2:
        - split to two patches
Changes for v3:
        - modify commit msg

 board/freescale/t208xqds/t208x_pbi.cfg | 3 +--
 board/freescale/t208xrdb/t2080_pbi.cfg | 3 +--
 board/freescale/t4qds/t4_pbi.cfg       | 3 +--
 board/freescale/t4rdb/t4_pbi.cfg       | 3 +--
 tools/pblimage.c                       | 2 +-
 5 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/board/freescale/t208xqds/t208x_pbi.cfg 
b/board/freescale/t208xqds/t208x_pbi.cfg
index e200d92..43be8a8 100644
--- a/board/freescale/t208xqds/t208x_pbi.cfg
+++ b/board/freescale/t208xqds/t208x_pbi.cfg
@@ -37,5 +37,4 @@
 09000014 ff000000
 09000018 81000000
 #Flush PBL data
-09138000 00000000
-091380c0 00000000
+091380c0 00100000
diff --git a/board/freescale/t208xrdb/t2080_pbi.cfg 
b/board/freescale/t208xrdb/t2080_pbi.cfg
index e200d92..43be8a8 100644
--- a/board/freescale/t208xrdb/t2080_pbi.cfg
+++ b/board/freescale/t208xrdb/t2080_pbi.cfg
@@ -37,5 +37,4 @@
 09000014 ff000000
 09000018 81000000
 #Flush PBL data
-09138000 00000000
-091380c0 00000000
+091380c0 00100000
diff --git a/board/freescale/t4qds/t4_pbi.cfg b/board/freescale/t4qds/t4_pbi.cfg
index 6126266..8d46003 100644
--- a/board/freescale/t4qds/t4_pbi.cfg
+++ b/board/freescale/t4qds/t4_pbi.cfg
@@ -18,5 +18,4 @@
 09000014 ff000000
 09000018 81000000
 #Flush PBL data
-09138000 00000000
-091380c0 00000000
+091380c0 00100000
diff --git a/board/freescale/t4rdb/t4_pbi.cfg b/board/freescale/t4rdb/t4_pbi.cfg
index e7bb673..0b326fa 100644
--- a/board/freescale/t4rdb/t4_pbi.cfg
+++ b/board/freescale/t4rdb/t4_pbi.cfg
@@ -24,5 +24,4 @@
 09000014 ff000000
 09000018 81000000
 #Flush PBL data
-09138000 00000000
-091380c0 00000000
+091380c0 00100000
diff --git a/tools/pblimage.c b/tools/pblimage.c
index d74fde9..16d94c98 100644
--- a/tools/pblimage.c
+++ b/tools/pblimage.c
@@ -297,7 +297,7 @@ int pblimage_check_params(struct image_tool_params *params)
                pbi_crc_cmd1 = 0x13;
                pbi_crc_cmd2 = 0x80;
                pbl_cmd_initaddr = 0x82000000;
-               pbl_end_cmd[0] = 0x09138000;
+               pbl_end_cmd[0] = 0x091380c0;
                pbl_end_cmd[1] = 0x00000000;
                pbl_end_cmd[2] = 0x091380c0;
                pbl_end_cmd[3] = 0x00000000;
-- 
2.1.0.27.g96db324

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot