We don't need to update fsl_ifc_sram_init() as fsl_ifc_sram_init is called from the fsl_ifc_chip_init which configures the ifc_ctrl->cs_nand with correct value based on the chip-select under initialization.
Best Regards, Ronak Desai On Tue, Sep 6, 2016 at 12:01 PM, Scott Wood <scott.w...@nxp.com> wrote: > On 09/06/2016 08:44 AM, Matt Weber wrote: > > Corrected the chip selection in IFC_NAND_CSEL register. Due to this > > issue in multi-chip nand use-case, IFC was always pointing to the last > > probed chip even though the user select another device through "nand > > device" command. > > > > Signed-off-by: Ronak Desai <ronak.de...@rockwellcollins.com> > > Signed-off-by: Matthew Weber <matthew.we...@rockwellcollins.com> > > --- > > drivers/mtd/nand/fsl_ifc_nand.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_ > nand.c > > index 7001cbd..2ce4a7d 100644 > > --- a/drivers/mtd/nand/fsl_ifc_nand.c > > +++ b/drivers/mtd/nand/fsl_ifc_nand.c > > @@ -296,7 +296,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd) > > int i; > > > > /* set the chip select for NAND Transaction */ > > - ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand); > > + ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << > IFC_NAND_CSEL_SHIFT); > > > > /* start read/write seq */ > > ifc_out32(&ifc->ifc_nand.nandseq_strt, > > Ouch. fsl_ifc_sram_init() should also be updated and cs_nand removed. > > -Scott > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
