Hi, On 23 August 2016 at 22:02, Kever Yang <kever.y...@rock-chips.com> wrote: > > rk3399 evb has two typec port(dwc3 controller) which support dual role > device with separate GPIO for vbus control and two USB 2.0 host port > (generic EHCI controller) with one GPIO for vbus control. > > This patch set enable all these host controllers and have test with usb > disk and usb ethernet devices on rk3399 evb. > > Note: type-C port only support usb 2.0 currently because the PD driver > and USB 3.0 phy driver not enabled. > > > Changes in v3: > - using fdtdec_get_bool and fdtdec_get_int instead of fdt_get_property > - other update by follow comments from Marek and Simon > - add Acked-by tag from Simon > > Changes in v2: > - update for comments from Marek > - use regulator_get_by_platname instead of uclass_get_device_by_name > - add Acked-by Tag from Simon > > Kever Yang (3): > dts: rk3399-evb: add regulator-fixed for usb host vbus > board: evb-rk3399: enable usb 2.0 host vbus power on board_init > config: evb-rk3399: enable fixed regulator > > MengDongyang (4): > usb: xhci-rockchip: add rockchip dwc3 controller driver > rockchip: select DM_USB for rockchip SoC > config: rk3399: add usb related configs > dts: rk3399: add dwc3_typec node for rk3399 > > arch/arm/Kconfig | 1 + > arch/arm/dts/rk3399-evb.dts | 14 +++ > arch/arm/dts/rk3399.dtsi | 45 +++++++ > board/rockchip/evb_rk3399/evb-rk3399.c | 15 ++- > configs/evb-rk3399_defconfig | 9 ++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/xhci-rockchip.c | 211 > +++++++++++++++++++++++++++++++++ > include/configs/rk3399_common.h | 13 ++ > include/linux/usb/dwc3.h | 14 +++ > 9 files changed, 322 insertions(+), 1 deletion(-) > create mode 100644 drivers/usb/host/xhci-rockchip.c > > -- > 1.9.1 >
No more comments and it has been almost two weeks, so I'm going to merge this. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
