On Wednesday 31 August 2016 12:36 AM, Andrew F. Davis wrote: > Add a section describing the additional boot types used on AM33xx > secure devices. > > Signed-off-by: Andrew F. Davis <a...@ti.com> > Reviewed-by: Tom Rini <tr...@konsulko.com>
Acked-by: Lokesh Vutla <lokeshvu...@ti.com> Thanks and regards, Lokesh > --- > doc/README.ti-secure | 32 ++++++++++++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/doc/README.ti-secure b/doc/README.ti-secure > index 54c996d..9b0fbf9 100644 > --- a/doc/README.ti-secure > +++ b/doc/README.ti-secure > @@ -43,6 +43,38 @@ Booting of U-Boot SPL > The script is basically the only required interface to the TI SECDEV > package for creating a bootable SPL image for secure TI devices. > > + Invoking the script for AM33xx Secure Devices > + ============================================= > + > + create-boot-image.sh \ > + <IMAGE_FLAG> <INPUT_FILE> <OUTPUT_FILE> <SPL_LOAD_ADDR> > + > + <IMAGE_FLAG> is a value that specifies the type of the image to > + generate OR the action the image generation tool will take. Valid > + values are: > + SPI_X-LOADER - Generates an image for SPI flash (byte swapped) > + X-LOADER - Generates an image for non-XIP flash > + MLO - Generates an image for SD/MMC/eMMC media > + 2ND - Generates an image for USB, UART and Ethernet > + XIP_X-LOADER - Generates a single stage u-boot for NOR/QSPI XiP > + > + <INPUT_FILE> is the full path and filename of the public world boot > + loaderbinary file (depending on the boot media, this is usually > + either u-boot-spl.bin or u-boot.bin). > + > + <OUTPUT_FILE> is the full path and filename of the final secure > + image. The output binary images should be used in place of the standard > + non-secure binary images (see the platform-specific user's guides and > + releases notes for how the non-secure images are typically used) > + u-boot-spl_HS_SPI_X-LOADER - byte swapped boot image for SPI flash > + u-boot-spl_HS_X-LOADER - boot image for NAND or SD/MMC/eMMC rawmode > + u-boot-spl_HS_MLO - boot image for SD/MMC/eMMC media > + u-boot-spl_HS_2ND - boot image for USB, UART and Ethernet > + u-boot_HS_XIP_X-LOADER - boot image for NOR or QSPI Xip flash > + > + <SPL_LOAD_ADDR> is the address at which SOC ROM should load the > + <INPUT_FILE> > + > Invoking the script for AM43xx Secure Devices > ============================================= > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
