This series adds ID code detection support for AM437x and enables
CONFIG_DISPLAY_{CPU/BOARD}INFO on all TI platforms.This series is based on top of Andrew's (Kconfig: Separate AM33XX SOC config from target board config) patch[1] I specifically did not use tools/moveconfig.py as Tom suggested to select these configs from targets instead of enabling it in defconfigs. [1] http://patchwork.ozlabs.org/patch/662954/ Lokesh Vutla (3): ARM: AM437X: Add Silicon ID support ARM: TI: Enable DISPLAY_CPUINFO on all SoCs ARM: TI: Enable DISPLAY_BOARDINFO on all boards arch/arm/Kconfig | 6 ++++++ arch/arm/cpu/armv7/am33xx/Kconfig | 11 +++++++++++ arch/arm/cpu/armv7/am33xx/sys_info.c | 5 ++++- arch/arm/cpu/armv7/omap3/Kconfig | 8 ++++++++ arch/arm/cpu/armv7/omap5/Kconfig | 4 ++++ arch/arm/include/asm/arch-am33xx/cpu.h | 3 ++- arch/arm/mach-keystone/Kconfig | 4 ++++ arch/powerpc/cpu/ppc4xx/Kconfig | 14 ++++++++++++++ board/amcc/acadia/Kconfig | 4 ---- board/amcc/bamboo/Kconfig | 4 ---- board/amcc/bubinga/Kconfig | 4 ---- board/amcc/canyonlands/Kconfig | 4 ---- board/amcc/katmai/Kconfig | 4 ---- board/amcc/kilauea/Kconfig | 4 ---- board/amcc/luan/Kconfig | 4 ---- board/amcc/makalu/Kconfig | 4 ---- board/amcc/redwood/Kconfig | 4 ---- board/amcc/sequoia/Kconfig | 4 ---- board/amcc/walnut/Kconfig | 4 ---- board/amcc/yosemite/Kconfig | 4 ---- board/amcc/yucca/Kconfig | 4 ---- board/liebherr/lwmon5/Kconfig | 4 ---- common/Kconfig | 16 ++++++++++++++++ include/configs/ti_armv7_keystone2.h | 1 - include/configs/ti_omap4_common.h | 2 -- include/configs/ti_omap5_common.h | 3 --- 26 files changed, 69 insertions(+), 64 deletions(-) -- 2.9.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
