On Mon, Aug 29, 2016 at 10:56 AM, Vagrant Cascadian <vagr...@debian.org> wrote: > fatload/ext2load both require that the device and partition be > specified after specifying the device type. Specify the first > partition on mmc device 0, which is the only mmc device currently > configured on the pandora. > > Signed-off-by: Vagrant Cascadian <vagr...@debian.org>
Acked-by: Grazvydas Ignotas <nota...@gmail.com> > --- > > include/configs/omap3_pandora.h | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h > index 380ec12..6ff9375 100644 > --- a/include/configs/omap3_pandora.h > +++ b/include/configs/omap3_pandora.h > @@ -93,8 +93,8 @@ > "mtdparts=" MTDPARTS_DEFAULT "\0" \ > > #define CONFIG_BOOTCOMMAND \ > - "if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \ > - "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \ > + "if mmc rescan && fatload mmc 0:1 ${loadaddr} autoboot.scr || " \ > + "ext2load mmc 0:1 ${loadaddr} autoboot.scr; then " \ > "source ${loadaddr}; " \ > "fi; " \ > "ubi part boot && ubifsmount ubi:boot && " \ > -- > 2.9.3 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot