On 08/26/2016 04:27 PM, Sriram Dash wrote: >> From: Marek Vasut [mailto:ma...@denx.de] >> On 08/24/2016 12:39 PM, Sriram Dash wrote: >>> Currently the controller by default enables the Receive Detect feature >>> in P3 mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably >>> support receive detection in P3 mode. >>> Enabling the USB3 controller to configure USB in P2 mode whenever the >>> Receive Detect feature is required. >>> >>> Signed-off-by: Sriram Dash <sriram.d...@nxp.com> >>> Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com> >>> --- >>> Changes in v2: >>> - Do Soc ver checking for applying erratum >> >> I tried applying this on u-boot-usb/next , but it fails to apply, please fix >> and repost. >> > > It might be conflicting with the patch for changing burst beat > "drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined > transfers requests". > https://patchwork.ozlabs.org/patch/661426/
Great, I already applied that one. > I will repost with the burst beat setting applied earlier. No, please fix this patch. >> -- >> Best regards, >> Marek Vasut -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
