Dear Rahanesh, In message <4ab75481.6060...@tataelxsi.co.in> you wrote: > > But i cannot find out the issue with config file.
We cannot find this out either. We don't know your hardware, and your code is not in mainline either. > This is the information i get from include/configs/my_board.h > /* Address and size of Primary Environment Sector */ > /* I put the env in the last sector since the board has */ > /* "top" type boot sectors... */ > #define CFG_ENV_ADDR 0xAD03F000 > #define CFG_ENV_SIZE 0x1000 > #define CFG_ENV_SECT_SIZE 0x10000 It has already meen explained before that this looks broken. I would expect that the environment address is a multiple of the block size, which it is not in your case. > and my config file is as below > > MTD device name Device offset Env. size Flash sector size =20 > Number of sectors > /dev/mtd0 0x3F000 0x1000 0x10000 Is 0x3F00 really the correct offset? I doubt so. What are your full U-Boot boot messages, and what does "flinfo" print? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Nearly everyone is in favor of going to heaven but too many are hoping they'll live long enough to see an easing of the entrance requirements. Never appeal to a man's "better nature." he might not have one. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
