This adds support for initializing MMC power from TWL6030 in SPL, which
is required when the bootrom didn't power the MMC device yet and U-Boot
is to be loaded from MMC (e.g. after setting boot mode from the SYS_BOOT
pins in peripheral boot).
Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
---
board/ti/panda/panda.c | 2 +-
include/configs/omap4_panda.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 13b5daf..ebab4e7 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -292,12 +292,12 @@ int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
+#endif
void board_mmc_power_init(void)
{
twl6030_power_mmc_init(0);
}
-#endif
#ifdef CONFIG_USB_EHCI
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index ffa22c3..41991e0 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -33,6 +33,8 @@
#include <configs/ti_omap4_common.h>
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
/* GPIO */
/* ENV related config options */
--
2.9.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
