The dwc3 controller is using 8 bit UTMI+ interface for USB2.0 PHY,
add one variable in dwc3/dwc3_device struct to support 16 bit
UTMI+ interface on some SoCs like Rockchip rk3399.

Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---

Changes in v2:
- use a variable to identify utmi+ bus width instead of CONFIG MACRO

 drivers/usb/dwc3/core.c |  6 ++++++
 drivers/usb/dwc3/core.h | 12 ++++++++++++
 include/dwc3-uboot.h    |  1 +
 3 files changed, 19 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 85cc96a..0613508 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -388,6 +388,11 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
        if (dwc->dis_u2_susphy_quirk)
                reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 
+       if (dwc->usb2_phyif_utmi_width == 16) {
+               reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
+               reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
+               reg |= DWC3_GUSB2PHYCFG_PHYIF_16BIT;
+       }
        dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 
        mdelay(100);
@@ -676,6 +681,7 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
 
        dwc->lpm_nyet_threshold = lpm_nyet_threshold;
        dwc->tx_de_emphasis = tx_de_emphasis;
+       dwc->usb2_phyif_utmi_width = dwc3_dev->usb2_phyif_utmi_width;
 
        dwc->hird_threshold = hird_threshold
                | (dwc->is_utmi_l1_suspend << 4);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 72d2fcd..d5bdf97 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -74,6 +74,7 @@
 #define DWC3_GCTL              0xc110
 #define DWC3_GEVTEN            0xc114
 #define DWC3_GSTS              0xc118
+#define DWC3_GUCTL1            0xc11c
 #define DWC3_GSNPSID           0xc120
 #define DWC3_GGPIO             0xc124
 #define DWC3_GUID              0xc128
@@ -162,7 +163,17 @@
 
 /* Global USB2 PHY Configuration Register */
 #define DWC3_GUSB2PHYCFG_PHYSOFTRST    (1 << 31)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM   (1 << 8)
 #define DWC3_GUSB2PHYCFG_SUSPHY                (1 << 6)
+#define DWC3_GUSB2PHYCFG_PHYIF_8BIT    (0 << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_16BIT   (1 << 3)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT       (10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK        (0xf << \
+               DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT (0x5 << \
+               DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT (0x9 << \
+               DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
 
 /* Global USB3 PIPE Control Register */
 #define DWC3_GUSB3PIPECTL_PHYSOFTRST   (1 << 31)
@@ -813,6 +824,7 @@ struct dwc3 {
 
        unsigned                tx_de_emphasis_quirk:1;
        unsigned                tx_de_emphasis:2;
+       unsigned                usb2_phyif_utmi_width;
        int                     index;
        struct list_head        list;
 };
diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h
index 7af2ad1..cc9ffe8 100644
--- a/include/dwc3-uboot.h
+++ b/include/dwc3-uboot.h
@@ -33,6 +33,7 @@ struct dwc3_device {
        unsigned dis_u2_susphy_quirk;
        unsigned tx_de_emphasis_quirk;
        unsigned tx_de_emphasis;
+       unsigned usb2_phyif_utmi_width;
        int index;
 };
 
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to