The spatch series converting legacy drivers from miiphy_register to
mdio_register changed the return convention of the davinci_emac internal
MDIO accessors, making the internal code relying on it misbehaving:
no mdiodev get registered and U-Boot crashes when using net cmds in the
context of the old legacy net API.

ATM davinci_emac_initialize and cpu_eth_init don't return a proper value
in that case but fixing them would not avoid the crash.

This change is just a follow-up to the spatch pass, the MDIO accessors
of the mdiodev introduced by the spatch pass retain their proper values.

Signed-off-by: Karl Beldan <karl.beldan+...@gmail.com>
---
 drivers/net/davinci_emac.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index ca457b8..3103441 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -243,10 +243,10 @@ int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t 
reg_num, u_int16_t *data)
 
        if (tmp & MDIO_USERACCESS0_ACK) {
                *data = tmp & 0xffff;
-               return 0;
+               return 1;
        }
 
-       return -EIO;
+       return 0;
 }
 
 /* Write to a PHY register via MDIO inteface. Blocks until operation is 
complete. */
@@ -267,7 +267,7 @@ int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t 
reg_num, u_int16_t data)
        while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO)
                ;
 
-       return 0;
+       return 1;
 }
 
 /* PHY functions for a generic PHY */
@@ -394,15 +394,14 @@ static int davinci_mii_phy_read(struct mii_dev *bus, int 
addr, int devad,
 {
        unsigned short value = 0;
        int retval = davinci_eth_phy_read(addr, reg, &value);
-       if (retval < 0)
-               return retval;
-       return value;
+
+       return retval ? value : -EIO;
 }
 
 static int davinci_mii_phy_write(struct mii_dev *bus, int addr, int devad,
                                 int reg, u16 value)
 {
-       return davinci_eth_phy_write(addr, reg, value);
+       return davinci_eth_phy_write(addr, reg, value) ? 0 : 1;
 }
 #endif
 
-- 
2.9.2

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to