The get_clock_freq() comes from freescale/common/cadmus.c and is
only valid for the CDS based 85xx reference platforms.  It would
be nice if we could read the 33 vs. 66MHz status somehow, but in
the meantime, tie it to CONFIG_SYS_CLK_FREQ like all the other
non-CDS boards do.

Signed-off-by: Paul Gortmaker <paul.gortma...@windriver.com>
---
 board/sbc8548/sbc8548.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index f4fd204..3104d37 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -336,13 +336,13 @@ pci_init_board(void)
        uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;       /* 
PORDEVSR[14] */
        uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;   /* 
PORPLLSR[16] */
 
-       uint pci_speed = get_clock_freq ();     /* PCI PSPEED in [4:5] */
+       uint pci_speed = CONFIG_SYS_CLK_FREQ;   /* get_clock_freq() */
 
        if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
                printf ("    PCI host: %d bit, %s MHz, %s, %s\n",
                        (pci_32) ? 32 : 64,
-                       (pci_speed == 33333000) ? "33" :
-                       (pci_speed == 66666000) ? "66" : "unknown",
+                       (pci_speed == 33000000) ? "33" :
+                       (pci_speed == 66000000) ? "66" : "unknown",
                        pci_clk_sel ? "sync" : "async",
                        pci_arb ? "arbiter" : "external-arbiter"
                        );
-- 
1.6.4.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to