> -----Original Message----- > From: york sun > Sent: Friday, August 12, 2016 3:45 AM > To: Shengzhou Liu <shengzhou....@nxp.com>; u-boot@lists.denx.de > Subject: Re: [PATCH 1/2] driver/ddr/fsl: Add general MMDC driver > > > +#define CMD_ADDR_MSB_MR_OP(x) (x << 24) > > +#define CMD_ADDR_LSB_MR_ADDR(x) (x << 16) > > +#define MDSCR_DISABLE_CFG_REQ (0 << 15) > > +#define MDSCR_ENABLE_CON_REQ (1 << 15) > > +#define MDSCR_CON_ACK (1 << 14) > > +#define MDSCR_WL_EN (1 << 9) > > +#define CMD_NORMAL (0 << 4) > > +#define CMD_PRECHARGE (1 << 4) > > +#define CMD_AUTO_REFRESH (2 << 4) > > +#define CMD_LOAD_MODE_REG (3 << 4) > > +#define CMD_ZQ_CALIBRATION (4 << 4) > > +#define CMD_PRECHARGE_BANK_OPEN (5 << 4) > > +#define CMD_MRR (6 << 4) > > #define CMD_BANK_ADDR_0 0x0 > > #define CMD_BANK_ADDR_1 0x1 > > #define CMD_BANK_ADDR_2 0x2 > > Removing those macros causes compiling error for ls1012afrdm_qspi > ls1012aqds_qspi ls1012ardb_qspi. Please rearrange the change. > > York
Why do you want to remove those macros? They are needed and useful, I compiled it for ls1012a QDS/ RDB/FRDM without any issue, and worked fine on boards. Shengzhou _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
