Hi Yangbo,
On 08/02/2016 04:33 PM, Yangbo Lu wrote:
> When the MMC framework was added in u-boot, the mmc_go_idle was
> added before mmc_send_op_cond_iter in function mmc_send_op_cond
> annotating that some cards seemed to need this. Actually, we still
> need to do this in function mmc_complete_op_cond for those cards.
> This has been verified on Micron MTFC4GACAECN eMMC chip.
This patch is not bad.. but i need to verify more about entire sequence.
Could you wait a bit?
Best Regards,
Jaehoon Chung
>
> Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
> ---
> drivers/mmc/mmc.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index f8e5f7a..d4e96bc 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -422,6 +422,9 @@ static int mmc_complete_op_cond(struct mmc *mmc)
>
> mmc->op_cond_pending = 0;
> if (!(mmc->ocr & OCR_BUSY)) {
> + /* Some cards seem to need this */
> + mmc_go_idle(mmc);
> +
> start = get_timer(0);
> while (1) {
> err = mmc_send_op_cond_iter(mmc, 1);
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
