Hey guys, I just started trying out my Pine64 1GB and mainline U-Boot and I've found that: commit 1a83fb4a17d959d7b037999ab7ed7e62429abe34 Author: Siarhei Siamashka <siarhei.siamas...@gmail.com> Date: Tue May 31 01:48:06 2016 +0300
sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80
is breaking boot for me. boot0 seems to run fine and then the last bit
of output that I get is:
boot0: start load other image
boot0: Loading BL3-1
Loading file 0 at address 0x40000000,size 0x00000200 success
boot0: Loading scp
Loading file 2 at address 0x00040000,size 0x0000c200 success
set arisc reset to de-assert state
Ready to disable icache.
Jump to secend Boot.
NOTICE: BL3-1: Running in SRAM A2 (@0x44000)
NOTICE: Configuring SPC Controller
NOTICE: BL3-1: v1.0(debug):d697594
NOTICE: BL3-1: Built : 09:15:57, Aug 4 2016
NOTICE: Configuring AXP PMIC
NOTICE: PMIC: already configured for RSB
NOTICE: PMIC: setup successful
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9
I'm using d697594 from
https://github.com/apritzel/arm-trusted-firmware.git for ATF and
boot0.img from the 20160701 Debian "longsleep" image. Any ideas?
Thanks!
--
Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
