> > > -----Original Message----- > > From: Marek Vasut [mailto:ma...@denx.de] > > Sent: Friday, June 10, 2016 9:40 AM > > To: Rajesh Bhagat <rajesh.bha...@nxp.com>; u-boot@lists.denx.de > > Cc: Sriram Dash <sriram.d...@nxp.com>; albert.u.b...@aribaud.net; > > prabha...@freescale.com; york sun <york....@nxp.com>; Rajat Srivastava > > <rajat.srivast...@nxp.com> > > Subject: Re: [PATCH v2 0/3] Add USB EHCI support for ls1012aqds > > > > On 06/10/2016 05:41 AM, Rajesh Bhagat wrote: > > > > > > > > >> -----Original Message----- > > >> From: Marek Vasut [mailto:ma...@denx.de] > > >> Sent: Thursday, June 09, 2016 7:12 PM > > >> To: Rajesh Bhagat <rajesh.bha...@nxp.com>; u-boot@lists.denx.de > > >> Cc: Sriram Dash <sriram.d...@nxp.com>; albert.u.b...@aribaud.net; > > >> prabha...@freescale.com; york sun <york....@nxp.com>; Rajat > > >> Srivastava <rajat.srivast...@nxp.com> > > >> Subject: Re: [PATCH v2 0/3] Add USB EHCI support for ls1012aqds > > >> > > >> On 06/09/2016 08:57 AM, Rajesh Bhagat wrote: > > >>> Adds USB EHCI support for ls1012qds by adding the support for NXP > > >>> ULPI PHY and adding the support it configuration files. Also > > >>> enables, USB2 IP in ns access defines. > > >>> > > >>> Rajesh Bhagat (3): > > >>> drivers: usb: fsl: add USB ULPI init code > > >>> config: ls1012aqds: Add USB EHCI support for ls1012aqds > > >>> armv8: ls1012a: Added CSU assignment for USB2 > > >>> > > >>> .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 + > > >>> .../include/asm/arch-fsl-layerscape/ns_access.h | 2 + > > >>> drivers/usb/host/ehci-fsl.c | 21 > > ++++++++++++++++++++ > > >>> include/configs/ls1012aqds.h | 5 ++++ > > >>> include/usb/ehci-ci.h | 2 +- > > >>> 5 files changed, 30 insertions(+), 1 deletions(-) > > >>> > > > > > > Hello Marek, > > > > > >> I wanted to apply these on u-boot-usb/master , but patch 2 fails to > > >> apply. Please rebase and repose. > > >> > > > > > > Can you apply below patch for Layerscape USB macro cleanup for > > > various Soc to apply above patch: > > > > > > https://patchwork.ozlabs.org/patch/631595/
Hello Marek, > > > > This has to go through soc tree, so I will have to wait for it to be > > applied. Let me know when it's in, then I can pick these patches. > > The dependency patch has made it to uboot master, Please apply the EHCI support patches. Commit: 9729dc9565c9c1812efbb630e1db4d54f580363c include: usb: Rename USB controller base address mapping Best Regards, Rajesh Bhagat > > > [root@phoenix u-boot-usb]$ pw-am.sh 631595 > > > 2016-06-10 09:02:02 > > > URL:https://patchwork.ozlabs.org/patch/631595/mbox/ [6138] -> > > > "pw-am-631595.patch" [1] > > > Applying: include: usb: Rename USB controller base address mapping > > > [root@phoenix u-boot-usb]$ pw-am.sh 632644 > > > 2016-06-10 09:02:18 > > > URL:https://patchwork.ozlabs.org/patch/632644/mbox/ [2104] -> > > > "pw-am-632644.patch" [1] > > > Applying: drivers: usb: fsl: add USB ULPI init code [root@phoenix > > > u-boot-usb]$ pw-am.sh 632646 > > > 2016-06-10 09:02:28 > > > URL:https://patchwork.ozlabs.org/patch/632646/mbox/ [2819] -> > > > "pw-am-632646.patch" [1] > > > Applying: config: ls1012aqds: Add USB EHCI support for ls1012aqds > > > [root@phoenix u-boot-usb]$ pw-am.sh 632645 > > > 2016-06-10 09:02:36 > > > URL:https://patchwork.ozlabs.org/patch/632645/mbox/ [1501] -> > > > "pw-am-632645.patch" [1] > > > Applying: armv8: ls1012a: Added CSU assignment for USB2 > > > > > > OR > > > > > > Please share if there is a need to rebase them. > > > > > > Best Regards, > > > Rajesh Bhagat > > > > > >> -- > > >> Best regards, > > >> Marek Vasut > > > > > > -- > > Best regards, > > Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
