>
> Hello Joakim,
>
> Joakim Tjernlund wrote:
> > After issuing a STOP one must wait until the STOP has completed
> > on the bus before doing something new to the controller.
> >
> > Also add an extra read of SR as the manual mentions doing that
> > is a good idea.
> >
> > Remove surplus write of CR just before a write, isn't required and
> > could potentially disturb the I2C bus.
> >
> > Signed-off-by: Joakim Tjernlund <joakim.tjernl...@transmode.se>
> > ---
> >  drivers/i2c/fsl_i2c.c |   12 ++++++++----
> >  1 files changed, 8 insertions(+), 4 deletions(-)
>
> Applied to u-boot-i2c testing
>
> I applied your 3 patches at the moment to the u-boot-i2c testing branch,
> in the hope to see some "Tested-by" ;-)

Great, hopefully you will get some Tested-by from Wolfgang G. and Timur

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to