Dear All,
> Hi All,
>
> On 07/12/2016 09:55 PM, Lukasz Majewski wrote:
> > Hi Jaehoon,
> >
> >> There is no data, it doesn't needs to wait for completing data
> >> transfer. (It seems that it can be removed.)
> >> Almost all timeout error is occured from stop command without data.
> >> After applied this patch, I hope that we don't need to increase
> >> timeout value anymore.
> >
> > This patch fixes issue (in a better way) for Odroid U3 write
> > performance (http://patchwork.ozlabs.org/patch/646932/) and hence
> > should be used.
> >
>
> Is there any other opinion for this patch?
> Who is maintaining u-boot-mmc? Is Pantelis still maintaining
> u-boot-mmc?
>
> Who can apply this patch and patch relevant to mmc?
Gentle ping .....
Pantelis could you pull this patch to u-boot-mmc tree?
>
> Best Regards,
> Jaehoon Chung
>
> >
> >>
> >> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
> >> ---
> >> drivers/mmc/sdhci.c | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> >> index 604f18d..0a38a56 100644
> >> --- a/drivers/mmc/sdhci.c
> >> +++ b/drivers/mmc/sdhci.c
> >> @@ -175,7 +175,8 @@ static int sdhci_send_command(struct mmc *mmc,
> >> struct mmc_cmd *cmd, flags = SDHCI_CMD_RESP_LONG;
> >> else if (cmd->resp_type & MMC_RSP_BUSY) {
> >> flags = SDHCI_CMD_RESP_SHORT_BUSY;
> >> - mask |= SDHCI_INT_DATA_END;
> >> + if (data)
> >> + mask |= SDHCI_INT_DATA_END;
> >> } else
> >> flags = SDHCI_CMD_RESP_SHORT;
> >>
> >
> > Acked-by: Lukasz Majewski <l.majew...@samsung.com>
> > Tested-by: Lukasz Majewski <l.majew...@samsung.com>
> >
> > Test HW: Odroid U3 (Exynos4):
> >
> > Odroid # ext4load mmc 0:2 0x41000000 dat_31M.img
> > 32505856 bytes read in 1471 ms (21.1 MiB/s)
> > Odroid # ext4write mmc 0:2 0x41000000 /dat_w55.img 0x1f00000
> > File System is consistent
> > update journal finished
> > 32505856 bytes written in 3528 ms (8.8 MiB/s)
> >
> > Performance improvement is even better than with previously proposed
> > patches.
> >
> > Test HW: Odroid XU3 (Exynos5):
> >
> > ODROID-XU3 # ext4load mmc 0:2 0x41000000 dat_31M.img
> > 32505856 bytes read in 6309 ms (4.9 MiB/s)
> > ODROID-XU3 # ext4write mmc 0:2 0x41000000 /dat_w1.img 0x1f00000
> > File System is consistent
> > update journal finished
> > 32505856 bytes written in 4884 ms (6.3 MiB/s)
> >
> >
>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
