Hi Ziyuan,
On 27 July 2016 at 21:43, Ziyuan Xu <xzy...@rock-chips.com> wrote:
> Miniarm is a rockchip rk3288 based development board, which has lots of
> interface such as HDMI, USB, micro-SD card, Audio etc.
>
> Signed-off-by: Ziyuan Xu <xzy...@rock-chips.com>
> ---
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/rk3288-miniarm.dts | 61 +++
> arch/arm/dts/rk3288-miniarm.dtsi | 533
> +++++++++++++++++++++++++
> arch/arm/mach-rockchip/rk3288/Kconfig | 10 +
> board/rockchip/miniarm_rk3288/Kconfig | 15 +
> board/rockchip/miniarm_rk3288/MAINTAINERS | 6 +
> board/rockchip/miniarm_rk3288/Makefile | 7 +
> board/rockchip/miniarm_rk3288/miniarm-rk3288.c | 15 +
> configs/miniarm-rk3288_defconfig | 65 +++
> doc/README.rockchip | 3 +-
> include/configs/miniarm_rk3288.h | 26 ++
> 11 files changed, 741 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/rk3288-miniarm.dts
> create mode 100644 arch/arm/dts/rk3288-miniarm.dtsi
> create mode 100644 board/rockchip/miniarm_rk3288/Kconfig
> create mode 100644 board/rockchip/miniarm_rk3288/MAINTAINERS
> create mode 100644 board/rockchip/miniarm_rk3288/Makefile
> create mode 100644 board/rockchip/miniarm_rk3288/miniarm-rk3288.c
> create mode 100644 configs/miniarm-rk3288_defconfig
> create mode 100644 include/configs/miniarm_rk3288.h
Acked-by: Simon Glass <s...@chromium.org>
But please can you keep things in alpha order? See below.
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 639c06d..50ddb39 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> rk3288-evb.dtb \
> rk3288-fennec.dtb \
> rk3288-popmetal.dtb \
> + rk3288-miniarm.dtb \
move up one line
> rk3036-sdk.dtb \
> rk3399-evb.dtb
> dtb-$(CONFIG_ARCH_MESON) += \
> diff --git a/arch/arm/dts/rk3288-miniarm.dts b/arch/arm/dts/rk3288-miniarm.dts
> new file mode 100644
> index 0000000..c741082
> --- /dev/null
> +++ b/arch/arm/dts/rk3288-miniarm.dts
> @@ -0,0 +1,61 @@
> +/*
> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier: GPL-2.0+ X11
> + */
> +
> +/dts-v1/;
> +#include "rk3288-miniarm.dtsi"
> +
> +/ {
> + model = "Miniarm-RK3288";
> + compatible = "rockchip,rk3288-miniarm", "rockchip,rk3288";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +};
> +
> +&dmc {
> + rockchip,num-channels = <2>;
> + rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
> + 0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
> + 0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
> + 0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
> + 0x5 0x0>;
> + rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
> + 0xa60 0x40 0x10 0x0>;
> + /* Add a dummy value to cause of-platdata think this is bytes */
> + rockchip,sdram-channel = /bits/ 8 <0x1 0xa 0x3 0x2 0x1 0x0 0xf 0xf
> 0xff>;
> + rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
> +};
> +
> +
> +&pinctrl {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + u-boot,dm-pre-reloc;
> + reg-shift = <2>;
> +};
> +
> +&sdmmc {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&emmc {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&gpio3 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&gpio8 {
> + u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/rk3288-miniarm.dtsi
> b/arch/arm/dts/rk3288-miniarm.dtsi
> new file mode 100644
> index 0000000..b889875
> --- /dev/null
> +++ b/arch/arm/dts/rk3288-miniarm.dtsi
> @@ -0,0 +1,533 @@
> +/*
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "rk3288.dtsi"
> +
> +/ {
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x80000000>;
> + };
> +
> + ext_gmac: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "ext_gmac";
> + #clock-cells = <0>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + autorepeat;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwrbtn>;
> +
> + button@0 {
> + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> + label = "GPIO Key Power";
> + linux,input-type = <1>;
> + gpio-key,wakeup = <1>;
> + debounce-interval = <100>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + pwr-led {
> + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "default-on";
> + };
> +
> + act-led {
> + gpios=<&gpio2 3 GPIO_ACTIVE_LOW>;
> + linux,default-trigger="mmc0";
> + };
> + };
> +
> + vcc_sys: vsys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + /*
> + * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
> + * vcc_io directly. Those boards won't be able to power cycle SD
> cards
> + * but it shouldn't hurt to toggle this pin there anyway.
> + */
> + vcc_sd: sdmmc-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_pwr>;
> + regulator-name = "vcc_sd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + startup-delay-us = <100000>;
> + vin-supply = <&vcc_io>;
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
> +&emmc {
> + broken-cd;
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + disable-wp;
> + non-removable;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + card-detect-delay = <200>;
> + disable-wp; /* wp not hooked up */
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
> + status = "okay";
> + supports-sd;
> + vmmc-supply = <&vcc_sd>;
> + vqmmc-supply = <&vccio_sd>;
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> +&gmac {
> + phy-supply = <&vcc33_lan>;
> + phy-mode = "rgmii";
> + clock_in_out = "input";
> + snps,reset-gpio = <&gpio4 7 0>;
> + snps,reset-active-low;
> + snps,reset-delays-us = <0 10000 1000000>;
> + assigned-clocks = <&cru SCLK_MAC>;
> + assigned-clock-parents = <&ext_gmac>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmii_pins>;
> + tx_delay = <0x30>;
> + rx_delay = <0x10>;
> + status = "ok";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c5>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + rk808: pmic@1b {
> + compatible = "rockchip,rk808";
> + reg = <0x1b>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int &global_pwroff>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_18>;
> + vcc9-supply = <&vcc_io>;
> + vcc10-supply = <&vcc_io>;
> + vcc11-supply = <&vcc_sys>;
> + vcc12-supply = <&vcc_io>;
> + vddio-supply = <&vcc18_ldo1>;
> +
> + regulators {
> + vdd_cpu: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-name = "vdd_arm";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-name = "vdd_gpu";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <1000000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_io";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <3300000>;
> + };
> + };
> +
> + vcc18_ldo1: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_ldo1";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <1800000>;
> + };
> + };
> +
> + vcc33_mipi: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc33_mipi";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd_10";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <1000000>;
> + };
> + };
> +
> + vcc18_codec: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_codec";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <1800000>;
> + };
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vccio_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <3300000>;
> + };
> + };
> +
> + vdd10_lcd: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-name = "vdd10_lcd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <1000000>;
> + };
> + };
> +
> + vcc_18: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_18";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <1800000>;
> + };
> + };
> +
> + vcc18_lcd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc18_lcd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt =
> <1800000>;
> + };
> + };
> +
> + vcc33_sd: SWITCH_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc33_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc33_lan: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc33_lan";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> + headset: nau8825@1a {
> + compatible = "nuvoton,nau8825";
> + #sound-dai-cells = <0>;
> + reg = <0x1a>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + nuvoton,jkdet-enable = <1>;
> + nuvoton,jkdet-pull-enable = <1>;
> + nuvoton,jkdet-pull-up = <0>;
> + nuvoton,jkdet-polarity = <1>;
> + nuvoton,vref-impedance = <2>;
> + nuvoton,micbias-voltage = <6>;
> + nuvoton,sar-threshold-num = <4>;
> + nuvoton,sar-threshold = <0xa 0x14 0x26 0x73>;
> + nuvoton,sar-hysteresis = <0>;
> + nuvoton,sar-voltage = <6>;
> + nuvoton,sar-compare-time = <0>;
> + nuvoton,sar-sampling-time = <0>;
> + nuvoton,short-key-debounce = <3>;
> + nuvoton,jack-insert-debounce = <7>;
> + nuvoton,jack-eject-debounce = <7>;
> + clock-names = "mclk";
> + clocks = <&cru SCLK_I2S0_OUT>;
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&wdt {
> + status = "okay";
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcc18_ldo1>;
> + status ="okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> + status = "okay";
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1 {
> + status = "okay";
> +};
> +
> +&usb_otg {
> + status= "okay";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
> + drive-strength = <8>;
> + };
> +
> + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
> + bias-pull-up;
> + drive-strength = <8>;
> + };
> +
> + backlight {
> + bl_en: bl-en {
> + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + buttons {
> + pwrbtn: pwrbtn {
> + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + eth_phy {
> + eth_phy_pwr: eth-phy-pwr {
> + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int: pmic-int {
> + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
> &pcfg_pull_up>;
> + };
> + };
> +
> + sdmmc {
> + /*
> + * Default drive strength isn't enough to achieve even
> + * high-speed mode on EVB board so bump up to 8ma.
> + */
> + sdmmc_bus4: sdmmc-bus4 {
> + rockchip,pins = <6 16 RK_FUNC_1
> &pcfg_pull_up_drv_8ma>,
> + <6 17 RK_FUNC_1
> &pcfg_pull_up_drv_8ma>,
> + <6 18 RK_FUNC_1
> &pcfg_pull_up_drv_8ma>,
> + <6 19 RK_FUNC_1
> &pcfg_pull_up_drv_8ma>;
> + };
> +
> + sdmmc_clk: sdmmc-clk {
> + rockchip,pins = <6 20 RK_FUNC_1
> &pcfg_pull_none_drv_8ma>;
> + };
> +
> + sdmmc_cmd: sdmmc-cmd {
> + rockchip,pins = <6 21 RK_FUNC_1
> &pcfg_pull_up_drv_8ma>;
> + };
> +
> + sdmmc_pwr: sdmmc-pwr {
> + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb {
> + host_vbus_drv: host-vbus-drv {
> + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + pwr_3g: pwr-3g {
> + rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig
> b/arch/arm/mach-rockchip/rk3288/Kconfig
> index 8ec1920..aaa13b5 100644
> --- a/arch/arm/mach-rockchip/rk3288/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3288/Kconfig
> @@ -33,6 +33,14 @@ config TARGET_POPMETAL_RK3288
> 2GB DDR3. Expansion connectors provide access to I2C, SPI, UART,
> GPIOs and display interface.
>
> +config TARGET_MINIARM_RK3288
> + bool "miniarm-RK3288"
> + help
> + Miniarm is a RK3288-based development board with 2 USB ports, HDMI,
> + micro-SD card, audio, Gigabit Ethernet. It also includes on-board
> + 8GB eMMC and 2GB of SDRAM. Expansion connectors provide access to
> + I2C, SPI, UART, GPIOs.
> +
> config TARGET_CHROMEBOOK_JERRY
> bool "Google/Rockchip Veyron-Jerry Chromebook"
> help
> @@ -76,4 +84,6 @@ source "board/rockchip/fennec_rk3288/Kconfig"
>
> source "board/chipspark/popmetal_rk3288/Kconfig"
>
> +source "board/rockchip/miniarm_rk3288/Kconfig"
Move up to maintain alpha order
> +
> endif
> diff --git a/board/rockchip/miniarm_rk3288/Kconfig
> b/board/rockchip/miniarm_rk3288/Kconfig
> new file mode 100644
> index 0000000..529c09f
> --- /dev/null
> +++ b/board/rockchip/miniarm_rk3288/Kconfig
> @@ -0,0 +1,15 @@
> +if TARGET_MINIARM_RK3288
> +
> +config SYS_BOARD
> + default "miniarm_rk3288"
> +
> +config SYS_VENDOR
> + default "rockchip"
> +
> +config SYS_CONFIG_NAME
> + default "miniarm_rk3288"
> +
> +config BOARD_SPECIFIC_OPTIONS # dummy
> + def_bool y
> +
> +endif
> diff --git a/board/rockchip/miniarm_rk3288/MAINTAINERS
> b/board/rockchip/miniarm_rk3288/MAINTAINERS
> new file mode 100644
> index 0000000..7537b8f
> --- /dev/null
> +++ b/board/rockchip/miniarm_rk3288/MAINTAINERS
> @@ -0,0 +1,6 @@
> +MINIARM-RK3288
> +M: Lin Huang <h...@rock-chips.com>
> +S: Maintained
> +F: board/rockchip/miniarm_rk3288
> +F: include/configs/miniarm_rk3288.h
> +F: configs/miniarm-rk3288_defconfig
> diff --git a/board/rockchip/miniarm_rk3288/Makefile
> b/board/rockchip/miniarm_rk3288/Makefile
> new file mode 100644
> index 0000000..9419b91
> --- /dev/null
> +++ b/board/rockchip/miniarm_rk3288/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# (C) Copyright 2016 Rockchip Electronics Co., Ltd
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += miniarm-rk3288.o
> diff --git a/board/rockchip/miniarm_rk3288/miniarm-rk3288.c
> b/board/rockchip/miniarm_rk3288/miniarm-rk3288.c
> new file mode 100644
> index 0000000..aad74ef
> --- /dev/null
> +++ b/board/rockchip/miniarm_rk3288/miniarm-rk3288.c
> @@ -0,0 +1,15 @@
> +/*
> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <spl.h>
> +
> +void board_boot_order(u32 *spl_boot_list)
> +{
> + /* eMMC prior to sdcard */
> + spl_boot_list[0] = BOOT_DEVICE_MMC2;
> + spl_boot_list[1] = BOOT_DEVICE_MMC1;
> +}
> diff --git a/configs/miniarm-rk3288_defconfig
> b/configs/miniarm-rk3288_defconfig
> new file mode 100644
> index 0000000..33a4a56
> --- /dev/null
> +++ b/configs/miniarm-rk3288_defconfig
> @@ -0,0 +1,65 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_ROCKCHIP_RK3288=y
> +CONFIG_TARGET_MINIARM_RK3288=y
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEFAULT_DEVICE_TREE="rk3288-miniarm"
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
> +CONFIG_HUSH_PARSER=y
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_IMLS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_PMIC=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
> interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +# CONFIG_SPL_SIMPLE_BUS is not set
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_SYSRESET=y
> +CONFIG_DM_MMC=y
> +CONFIG_ROCKCHIP_DWMMC=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +# CONFIG_SPL_PINCTRL_FULL is not set
> +CONFIG_ROCKCHIP_RK3288_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK808=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_REGULATOR_RK808=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_PWM=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEBUG_UART_BASE=0xff690000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550=y
> +CONFIG_USE_PRIVATE_LIBGCC=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_CMD_DHRYSTONE=y
> +CONFIG_ERRNO_STR=y
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 1b3a602..b69a526 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -36,7 +36,7 @@ You will need:
> Building
> ========
>
> -At present six RK3288 boards are supported:
> +At present seven RK3288 boards are supported:
>
> - Firefly RK3288 - use firefly-rk3288 configuration
> - Radxa Rock 2 - use rock2 configuration
> @@ -44,6 +44,7 @@ At present six RK3288 boards are supported:
> - EVB RK3288 - use evb-rk3288 configuration
> - Fennec RK3288 - use fennec-rk3288 configuration
> - PopMetal RK3288 - use popmetal-rk3288 configuration
> + - Miniarm RK3288 - use miniarm-rk3288 configuration
Can you sort all of these?
>
> Two RK3036 board are supported:
>
> diff --git a/include/configs/miniarm_rk3288.h
> b/include/configs/miniarm_rk3288.h
> new file mode 100644
> index 0000000..342557f
> --- /dev/null
> +++ b/include/configs/miniarm_rk3288.h
> @@ -0,0 +1,26 @@
> +/*
> + * (C) Copyright 2016 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define ROCKCHIP_DEVICE_SETTINGS
> +#include <configs/rk3288_common.h>
> +
> +#define CONFIG_SPL_MMC_SUPPORT
> +
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV 1
> +/* SPL @ 32k for ~36k
> + * ENV @ 96k
> + * u-boot @ 128K
> + */
> +#define CONFIG_ENV_OFFSET (96 * 1024)
> +
> +#define CONFIG_SYS_WHITE_ON_BLACK
> +#define CONFIG_CONSOLE_SCROLL_LINES 10
> +
> +#endif
> --
> 1.9.1
>
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
