Hi Tom, Here is another sunxi pull-req for v2016.09, this adds some more fixes to the h3 ethernet driver and re-enables it. There are also some other fixes.
The following changes since commit 5c928d02044345b843202f23540c3765468c1d6f: m68k: code reformatting for all start.S files (2016-07-30 22:59:18 +0200) are available in the git repository at: http://git.denx.de/u-boot-sunxi.git master for you to fetch changes up to fcada3b05e56c9b22bf5f92ba94fa80449452e76: sunxi: Re-enable h3 emac support (2016-07-31 21:45:47 +0200) ---------------------------------------------------------------- Chen-Yu Tsai (2): sunxi: gpio: Add .xlate function for gpio phandle resolution sunxi: Hummingbird_A31_defconfig: Drop MACPWR option Hans de Goede (4): sunxi: Ensure that the NIC specific bytes of the mac are not all 0 sunxi: On newer SoCs use words 1-3 instead of just word 3 from the SID net: sun8i_emac: Fix DMA alignment issues with the rx / tx buffers sunxi: Re-enable h3 emac support arch/arm/dts/sun8i-h3-orangepi-one.dts | 11 +++++++++++ board/sunxi/board.c | 24 +++++++++++++++++++++++- configs/Hummingbird_A31_defconfig | 2 +- configs/orangepi_one_defconfig | 1 + configs/orangepi_pc_defconfig | 1 + configs/orangepi_pc_plus_defconfig | 1 + configs/pine64_plus_defconfig | 1 + drivers/gpio/sunxi_gpio.c | 16 ++++++++++++++++ drivers/net/sun8i_emac.c | 13 ++++++++++--- 9 files changed, 65 insertions(+), 5 deletions(-) Regards, Hans _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
